Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 21, 2026
@jamespa In case it is of any help and enlightenment, I am attaching charts just taken from my Daikin EDLA08 8kW ASHP from Homely dashboard for the la...
@technogeek Realistically priced electricity is well overdue in my opinion and can’t come too soon! Regards, Toodles.
@trbob The control of heat output from each radiator or emitter is best set using the lockshield valve rather than using a TRV; the TRV should be thou...
@bontwoody Perhaps the bee ran out of charge 😉
@ccap FWIIW, Our DHW is handled by a Sunamp Thermino ePV210 unit; this heats the water using solar energy from our PV arrays, or it can take power fro...
@ellyse Is it possible that some of the icons you are not seeing on your own display are for functions that you do not have (naming of parts again!)? ...
@cathoderay Your wife or the mid-wife will probably have the best idea!😳 (Sorry) Toodles.
@allyfish ‘22 rads’, that’s a lot of emitters innit? Another possible theory for the 2 and 3 panel radiators; the rear is normally close to a wall and...
@cathoderay We are back to the person with one watch always knowing the correct time whilst the person with two watches never being quite sure.ὠ...
@cathoderay On a general note, I wonder what ball-park figure one might apply to the accuracy tolerance of the data supplied by default measuring equi...
@benson I can’t help but feel that the policy makers at MCS should be compelled to read this and similar RHH topics; perhaps they would then have some...
@benson I found that British Gas were always reluctant to actually test and if necessary, top up additive levels after draining and replacing a radiat...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
About the original question: Flow rate for MVHR is ad...
By bobflux , 33 minutes ago
-
Britain’s Heat Pump Shitshow is now available to pre-or...
By Mars , 23 hours ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 3 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 3 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 3 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 4 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 4 days ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 4 days ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 4 days ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 4 days ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 4 days ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 5 days ago
SPONSORS
