Last seen: Dec 13, 2025
@jamespa i guess you're on FIT exports? With a high rate.. inflation linked? If so... highly doubtful you can round trip battery exports to increase...
Typo... of course Max charge/discharge rate is 2600kWh. Should read: Max charge/discharge rate is 2.6kWh.
@papahuhu lithium prices have turned higher last few months. It may be that we're around cheapest battery prices? We will only know with hindsight!
@jamespa business case for batteries is not simple and at end of day may partly be a leap of faith! A few comments for mix. I'm on Intelligent Go impo...
@adamk my suggestion would be to try -1deg say 1 hour before normal bedtime. And back to 20.5deg 1 hour before getting up Tweaking both temperatu...
@majordennisbloodnok thanks. Unfortunately i can't update to clarify. My intention was import tariffs only. But we'll see if anything meaningful is d...
@jamespa yes, i should add i also schedule DHW heating for night time. Most of the time we use less than full tank per day so heat to 50deg at cheap r...
There are 2 issues here. The Topic is Setback Savings but the vast majority of the discussion has been around ENERGY usage. However with ToU tariffs i...
I mentioned above "2025 move to Intelligent Go meant batteries used more over summer to maximise cheap overnight imports and maximise exports"A smal...
@judith its interesting to see the 6.5kw array is at just 5deg pitch and facing east. I suspect they produce 90% or more of the production if they'd ...
Latest Posts
-
RE: LiFePO4 lithium battery fires and explosions
That's somewhat of an understatement. 🤨 The ...
By Transparent , 3 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@simonf thats interesting as I’ve noticed my flow and r...
By AdamK , 4 hours ago
-
RE: MELcloud scheduling misbehaviour
No, it gets to set temperature easily even during perio...
By Abernyte , 5 hours ago
-
RE: Setback savings - fact or fiction?
@robs — is there anything weird in your post or footer/...
By cathodeRay , 5 hours ago
-
RE: Free Ecoheat Heat Pump Install
Sorry hit 'add reply' too early, this forum layout will...
By Deltona , 6 hours ago
-
RE: Poll for Time of Use, tariffs, technology
@batpred Fair enough, if the usage of these materials i...
By Papahuhu , 6 hours ago
-
And arguably even more important, sodium will be hopefu...
By Batpred , 9 hours ago
-
RE: A Smarter Smart Controller from Homely?
I've been thinking of emailing Homely to ask for a few ...
By JohnnyB , 21 hours ago
-
Max output of Heat pump (Daikin 4Kw EDLA04)
Hello, I am a bit puzzled that according to pcdb tes...
By GeorgeA , 22 hours ago
-
In that case, @technogeek, I’d sign up for the free sol...
By Majordennisbloodnok , 22 hours ago
-
RE: Has Anyone Else Noticed a Decline in Tradesmanship?
@cathoderay Hence my rider about ‘all else being equal’...
By Toodles , 23 hours ago
-
RE: Heat Pump Performance Analysis Web App using Modbus Data
@redzer_irl — all my heat pump data is in csv files, me...
By cathodeRay , 23 hours ago
-
That’s not a problem. If you can hit the main landing p...
By Majordennisbloodnok , 24 hours ago
-
RE: Configuration issues with 10kW Midea R32 heat pump
@benson I believe there are quite a few of these instal...
By Toodles , 24 hours ago
-
RE: 10kw heat pump run in 24*7 data?
I would say you most likely do need 10kW. My gas consu...
By JamesPa , 1 day ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@thundermink I managed to find the fault. I did it a lo...
By meehow , 1 day ago
-
RE: Here is my heat pump installation with questionable COP in Italy
Well in Italy there is nothing controlling the quality ...
By materox345 , 1 day ago
-
RE: What a Bad Heat Pump Installation Looks Like
@editor The trick to an inside unit installation is to ...
By MikeFl , 2 days ago
