Search with Wattson
Activity
 
Notifications
Clear all

Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!

TechnoGeek
TechnoGeek
@technogeek
Member
Estimable Member
Joined: Aug 4, 2023
Last seen: Oct 21, 2026
Topics: 5 / Replies: 176
Reply
RE: New 5kW Samsung Gen6 heat pump owner with loads of questions

@bontwoody @mike-h @johnnyb From my various tweeking with the Samsung, I think the PWM pump is automatically adjusted by the controller to maintain...

2 years ago
Reply
RE: ASHP and how it should run and potential kw consumption?

@jamespa I have a setback of 2C at the moment with a cheap overnight tariff. To overcome the slow recovery issue I am currently experimenting with t...

2 years ago
Reply
RE: New 5kW Samsung Gen6 heat pump owner with loads of questions

@bontwoody Thanks for that snippet of information! You have just saved me from doing an alteration to my system that would have been a complete w...

2 years ago
Reply
RE: How to increase DHW water temperature on Samsung Gen 6 Control Panel

@misiak I think this is a link to the heatgeek resource

2 years ago
Reply
RE: How to increase DHW water temperature on Samsung Gen 6 Control Panel

@misiak Hello. The Samsung pump is capable of generating a flow temperature of up to 70C. The heat transfer into DHW (depends on storage tank efficien...

2 years ago
Reply
RE: New 5kW Samsung Gen6 heat pump owner with loads of questions

@jamespa @johnr from my understanding COP is the ratio of how much heat energy a thermal machine can move compared to the work (electrical input) done...

2 years ago
Reply
RE: New 5kW Samsung Gen6 heat pump owner with loads of questions

@johnnyb to be fair I did not know in the beginning either. I had to do my own research and experimentation to understand what was going on. This li...

2 years ago
Reply
RE: New 5kW Samsung Gen6 heat pump owner with loads of questions

@johnnyb If it is any help, I calculate the COP / SCOP using the following formula for my Samsung heat pump ( Energy Generated + Energy In ) / E...

2 years ago
Reply
RE: In the Bleak Midwinter... Midea heat pump performance, poor COP and windchill in action

@cathoderay this looks similiar to a phenomenon I experienced while setting up my weather curve. I fixed my issue by slightly increasing the flow te...

2 years ago
Reply
RE: ASHP noise, and running a high temperature heat pump at low temperature

@ccap running my oil boiler is just a personal choice for me. My heat pump is physically capable of heating the house to about -6C OAT before it will ...

2 years ago
Reply
RE: ASHP noise, and running a high temperature heat pump at low temperature

@ccap just to give you some rough comparisons, I have a Samsung 12Kw HT Quiet unit which most of the time produces a flow temperature in the 30C range...

2 years ago
Reply
RE: Heat pumps don't work: debunking myths & misconceptions

@editor If I was in your shoes I would be making fitting a smart meter a priority. I know they have had bad press recently but smart meters open up a ...

2 years ago
Page 8 / 16
Share:

SPONSORS

Join Us!

Installer Finder

Degrees of Separation

Latest Posts

SPONSORS

Click to access the login or register cheese
Protected By
Shield Security PRO