Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 13, 2026
Sounds like I will have to look into this. We have a Solar wet system plumbed into the second heat exchanger of our DHW tank (you may have seen the ri...
You’re comments sound very defeated... Surely there has to be some usefulness out of all the information generated. When we first got data out of our ...
At one level it made sense to me that the lines should disappear since they are not just temperature readings.... they also represent a snapshot of en...
gotaASHP our plumbing engineer was excellent his pipe work and layout was a work of art. But the electrical side of things was a different story. I gu...
Isn’t it madness? I don’t recall “self commissioning” being written in to the contract when I bought this expensive piece of kit? Still, this group...
“Operation settings” adjustments offer some hopeful results. I’ve been trying different settings and got our best COP results so far. Control inter...
I don’t see it as the only way.... how about lowering the ambitious set flow temperature? So that it matches the radiant capabilities of an inefficien...
@benseb I think I read some earlier posts of your installation. The biggest problem I recall was the long line of rads off a 15mm pipe you also have s...
[/quote] The heat loss from your home is dependent upon the temperature difference between inside and outside. This can vary quite considerably thro...
No, that’s a slightly different slant on what I said. My point was that when you’ve resolved any problems you may have with your system you may find ...
Hi @adamba thanks for the information you’ve sent. Regarding the Freeze Stat Function.You can adjust this down to a lower temperature without affe...
- 27 Forums
- 2,756 Topics
- 64.8 K Posts
- 1,488 Online
- 7,160 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A bit more on ERA5 gridding: This...
By cathodeRay , 1 hour ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@jamespa The DT will be what the DT will be, its d...
By Rob of York , 2 hours ago
-
RE: Glass lined Cylinder for private water supply
I have one of those... a Thermal Store. In my case th...
By Transparent , 5 hours ago
-
RE: 7kW EV Charger Options Advice
Yeah that's normal Copper is expensive, and the kettl...
By bobflux , 5 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 7 hours ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@kilgorexv definitely a larger inverter will help and m...
By AndrewJ , 3 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
The installation is almost done! I've written up two ...
By tomasmcguinness , 3 days ago
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 4 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 4 days ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 4 days ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 6 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 1 week ago


