Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Mar 21, 2026
You may have a faulty ftc6 controller!? do you have auto adaptive function? Thats the “room temperature” option, as opposed to “weather compensati...
@willen-john wow. That’s a big improvement. 👍🏻
@tadpole hi. Thanks for the further information. I can see that the reservoir of hot water may have been proposed to feed the two underfloor heatin...
Thats good to hear. One possibility removed. It sounds like the Secondary Return, re-circulation, as described above is a reasonable contender… your...
I think, someone in the past also had a 3 port valve stuck partially open which can mean that while the heating is on the circulating water, at a lowe...
Hi Tadpole I think you’re wise to let the installer and manufacturer fully install and commission before trying to fix anything. However, your 4 ...
@jamespa perfect…. thanks James Added (We tried a number of secondary pump settings until we got the lowest change in DT but we couldn’t do much...
hi Ian, here is my sketch again what do you mean that the DT Is the same both sides? The sketch shows a 1degC drop in one direction and a 1degC rise...
@iancalderbank thanks Ian yes there is a drop in flow temp across the LLH but there is a more or less equal rise in return temp across the LLH. Thes...
Earlier post… from 4 months ago Can anyone help with some maths on estimating percentage of energy loss of DT….? After a summer break we are no...
Thanks For your help... There are a few characteristics which appear to differ from one HP make to another HP make. In this case the relevant charac...
Interesting.... we also have a Secondary pump. However both pumps are external and adjusted manually to reach the desired deltaT however this can vary...
Latest Posts
-
RE: Debugging my legionella immersion heater
To conclude this story, I hadn't realised that immersio...
By Prunus , 2 hours ago
-
RE: Setback savings - fact or fiction?
You are right to be intrigued by it IMHO. SOFAIK it is...
By JamesPa , 6 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@swwils there is no logic to oversizing a heat pump. It...
By AgentGeorge , 8 hours ago
-
RE: Vaillant Sensocomfort Time
Thank youy for the pointer. I think I have managed to ...
By ispookie666 , 23 hours ago
-
RE: Forum updates, announcements & issues
I have been doing a lot of work on the site lately and ...
By Mars , 23 hours ago
-
@majordennisbloodnok good advice, thanks for that.
By David999 , 1 day ago
-
RE: My Grant R290 9kW Heat Pump Installation
I am following this thread with great interest and than...
By TaffontheTaff , 1 day ago
-
RE: Sizing an ASHP; Heat loss and kW
You can't measure heat loss with a website. But you ca...
By JamesPa , 2 days ago
-
RE: Estimating true heat loss from twelve months of consumption data
@ian33a — I have a sort of residual interest in this pr...
By cathodeRay , 2 days ago
-
Hi, Thank you. So its a Daikin Altherma 3M...
By Lbart68 , 2 days ago
-
I have a Contactum CU. Would the below RCBO (descriptio...
By Batpred , 2 days ago
-
RE: Samsung gen 7 HP 12kw - auto control issue and water law
@chainreaction Agree with @broadsman , it seems many ...
By Batpred , 2 days ago
-
RE: Anyone concerned about GivEnergy?
@transparent Thank you and appreciate your timely reply...
By SUNNYSKIES , 2 days ago
-
RE: Grant Aeona 3 R32 cycling with weather compensation.
The hot water heating looks normal. The heat transfer ...
By GrahamF , 2 days ago
