Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 13, 2026
this mornings HP activity here concurs with harryup and cathoderay Regarding defrosting. the fan definitely stops so there is just the circulating p...
Have you had the strainers and metal filters cleaned out? There is a sump on the isolation valve on the outdoor return pipe which has a steel strainer...
Hi Kev and Ray Our heating was on a low setback so it was inactive for heating purposes. This allowed us to see the auto-reheat for defrost purposes...
Hi Greekgod I thought you might have known…. All heat pumps are made by the Greek goddess of Mischief, Delusion and Folly. Have you or your installe...
Morgan, try this Mitsubishi video. It shows how to set a On off schedule and vary temperatures along the time line. Just remember that Auto adapt...
here is yesterday’s temp drop chart. I forgot to include And todays so far
Not sure information this helps your modelling but here goes nothing: our house is empty and has been slowly cooling down since Saturday the initi...
Yes we’ve noticed and have used a small mid point kink in the WC curve. Our reasoning for trying this is that we have a large expanse of glazing in th...
Hi Kev. Have you had any results from new settings of temp differentials? i altered my wc curve and interval plus shortened temp differential. we ...
Thanks for your kind words. Operating at 18c should give you a good COP and, as you’re charts suggest, an even temp. I have found a useful temp sett...
Hi DamijanD The comment I made relating to personal preference just means it’s your choice. If you want to see the room temperature in your living...
you may find it useful: The wireless remote information is fully integrated in the data on the main controller. Also is available on the MELCloud ap...
- 27 Forums
- 2,756 Topics
- 64.8 K Posts
- 1,724 Online
- 7,160 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: 7kW EV Charger Options Advice
I was hoping that the electrician would route the under...
By Rusty , 8 hours ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
@jamespa @transparent Sorry about that. Here are the ch...
By jon , 8 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Yes, I too am waiting for V2H before I get an E...
By Papahuhu , 10 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Post by: @old_scientist The first thing I would say ...
By Rob of York , 12 hours ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 18 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@kilgorexv definitely a larger inverter will help and m...
By AndrewJ , 2 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
The installation is almost done! I've written up two ...
By tomasmcguinness , 3 days ago
-
RE: Glass lined Cylinder for private water supply
This has turned into a fascinating little rabbit hole. ...
By Mars , 3 days ago
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 4 days ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 6 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 7 days ago



