Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Feb 2, 2022
£16.5k for a major ASHP installation - probably 2-3 weeks work in total as it was a problematical install, including about 1k of extra bits and bobs.
He's talking a fair bit of rubbish here but the short answer is I think you'd be very lucky to get one in and RHI approved by then due to the lack of ...
It's more underneath the roof to the woodstore than inside it - you can see the dogs kennel in the last picture it's pretty much there. Has about 2' b...
Hi....we originally planned ours to be at the back of the house, shown below as the X: This is where the installers (and us) wanted it as it would...
Hi Mike, yeah draughtproofing is absolutely essential for an ASHP. Because we had the logburners on semi-permanently the draughts were never a massive...
Hi Mike, we have a 210m2 stone cottage that sounds similar to yours with thick walls and mostly tiled floors. It works well but we have a single story...
Wow...that's a huge amount indeed.
Ahh that makes sense thank you. We have a similar size house, if a little smaller (210 vs 230m2) and thermostats mostly set to 18/19. Our total usage ...
Interesting figures - it looks like you are using less electricity in 2021 than 2020? Obviously the costs have gone up though so I appreciate your bil...
So as an update, I think November has been the first real 'cold' month we've experienced and we had some really hard frosts aswell out here in the mid...
Interesting conundrum and longterm I am sure prices will come down, as they have done with Solar - my folks installation was £16k about 15 years ago a...
Hi Keith, Sorry to hear about your problems with installers. We had a system fitted in the summer and to be honest, it was a total nightmare getting...
- 27 Forums
- 2,758 Topics
- 64.9 K Posts
- 1,361 Online
- 7,162 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay I started to record oil usage per month on ...
By ian33a , 2 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 5 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 10 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago



