Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 13, 2023
Two weeks have passed since everything was commissioned. The ASHP has used 520 kWh of electricity so far, averaging 35 kWh per day (excluding the fir...
I've had my LG Therma V running for a week now. We have underfloor heating throughout. DHW is set to 50 degrees and water flow temp is set to 40 deg...
thanks @Mars - just watched it, and very interesting!
Our ASHP is finally installed 🙂 Because our house already had underfloor heating in every room, I was expecting the installation to be a relativel...
Tomorrow's the big day... installation! Yesterday, our energy supplier (Neon Reef) went in to administration, so we've gone from a 13p/kWh fixed pri...
HIES have responded to my email, I feel their response is actually much more informative than the response I had from MCS: First of all, I would s...
Their assumptions are listed in the heat loss calcs. I gave an example above about how their assumptions for the glass is different. It's the same fo...
I think this is exactly what's happened. All three companies have used different inputs for the wall insulation, roof insulation, glass heat loss, et...
Indeed, I thought the whole point of using MCS certified installers to provide a service was to get some level of guarantee that they do things correc...
I've updated the summary to show the calculated heat loss in watts and the heat loss W/m2 as per @Kev M's suggestion. Company A heat loss calculatio...
@editor Yes, please do. Thanks!
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay I started to record oil usage per month on ...
By ian33a , 53 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 4 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 9 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
