Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jul 25, 2025
@grantmethestrength if you already have Home Assistant, just buy the Svenar dongle. It will take you 5 minutes to set up and you will have everything ...
That is something @bart would need to tell us. I have my probes firmly insulated and actually added thermal paste in order to get as close as possible...
This: being uninsulated ensures that any reading out of this will be completely off (unless you're interested in room temperature).
Bit late to the party maybe, but my Midea clone heatpump slowly raps up its electricity use at the beginning of a cycle. I have a designated Eastron S...
Happy to Google it for you 😉
I have a bit of the same issue: However, this is DIY so I can only kick myself. The TWV is crewed on press fittings on three sides with no possibi...
Hi @iwolf I wrote something about this on a German forum that also covers this ASHP and the many clones. Maybe it is of help. I do note that I have n...
The answer is litterally around the corner.... There is some space there and placing the HP thare would show a smaller profile. In addition, the trunk...
@jdpd isn't the Clivet machine that is listed as compatible a Midea clone? I am operating a 10kw Midea clone which is modbus-enabled and would be hap...
I have 12 loops that seemed not balanced at all when we bought our place. I bought 12 cheap LCD thermometers (20 Euros or so) with sensor on a wire an...
I did not install a heatpumt primarily to save money (although I am glad I actually do) but to save the environment. In many discussions, it is just a...
This are my data for my first full year of running a 10kW Midea which heats 250m2 of UFH in a 1980's house with original double glazing. LWT sits betw...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Comms and power cabling to outside unit
@jamespa Thanks James. I’ll see what they say. I alw...
By Papahuhu , 5 hours ago
-
RE: Vaillant Arotherm Pro vs new Plus
when our system was installed in September 2 years ago ...
By Judith , 5 hours ago
-
RE: Rate the quality of your heat pump design and installation
I had a Heat Geek lead install by Green Heat Norfolk. T...
By Orlando , 13 hours ago
-
+1 that works well If most of the thermal mass is in ...
By bobflux , 21 hours ago
-
RE: Mitsubishi Ecodan FTC6 settings
While @F1p's dongles are great, the FTC can do this its...
By RobS , 1 day ago
-
RE: Samsung heat pump - data cable issue
If it's a data cable, current will be minuscule, voltag...
By bobflux , 1 day ago
-
RE: MCS Quality Audit – Has Anyone Had One? Did It Lead to Remediation?
I got hit with an RHI audit in 2022. It was far from c...
By Abernyte , 1 day ago
-
RE: Electricity price predictions
@papahuhu Groucho Marx had something to say about no...
By Toodles , 2 days ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@jamespa haha very true, although the engineer yesterda...
By swwils , 2 days ago
-
RE: What a difference a few degrees make.
Wow. Having accepted the challenge, I ran the cold tap ...
By Old_Scientist , 2 days ago
-
RE: HeatPump maintenance in Swindon area?
@vince31 have you tried using our finder:/p>
By Mars , 2 days ago
-
Looking for beta testers for a new homeowner heat pump tool
Over the past few months I've been building a brand new...
By Mars , 2 days ago
-
-
RE: Indevolt Batteries UK Support & Info Thread
It depends on how you configure it via the app. The ma...
By JamesPa , 3 days ago
SPONSORS
