Last seen: Jan 13, 2026
@dgclimatecontrol I have no intention of removing the cover. As you suggest, way too daunting for me. Thanks for the input. Appreciated.
@hcas all well and good but the majority of us, myself included, have no idea how to even identify, locate and then fix the issue with these sensors. ...
@thundermink can you provide photos to illustrate your fixes please? I wouldn't know where to start looking for temp' sensors or liquid sensor TH3 on...
Do you have both the Mitsubishi Ecodan FTC Wireless Receiver PAR-WR61R-E and the Transmitter PAR-WT60R and have them paired?
@dgclimatecontrol Many thanks for that info. Looks like I will be sticking with the original then.
@davidalgarve If they are 'off' because of a timed schedule, and this is their time to be 'off', it might be that it is actually in its 'idle' mode...
@davidalgarve My DHW is switched on.
Similarly, my CH is currently turned off, and Melcloud shows this.
You will only heat the full 300L from Stone Cold. Thereafter, you will be topping up and heating what you use. If the DHW tank is well insulated, I wo...
@hcas and @editor I have just watched the above video which makes me lean more and more toward going the Havenwise route. I do wonder though, as w...
@anca1808 It's a shame to say it but if I were in your position under your circumstances I would snap his arm off for the gas boiler option.
@m1kegibson This will show you how to check and adjust DHW settings. He waffles a bit to about half way through then gets to the important bit so ...
Latest Posts
-
RE: Ecodan Pump Issues… Circulation pump turns off when heat pump compressor turns off
@jamespa sorry James, yes larger surface area, messing ...
By ASHP-BOBBA , 42 minutes ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In the Home Assistant firmware the data points...
By F1p , 49 minutes ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@johnbroome if it is not the pressure in the expansion ...
By ASHP-BOBBA , 1 hour ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
In recent cold weather th...
By JamesPa , 1 hour ago
-
So I hear the export MPAN that UKPN assigned should be ...
By Batpred , 4 hours ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
From what I read, the Solis has a very long list of err...
By Batpred , 4 hours ago
-
RE: Ideal HP290 14kW ASHP - how to optimise
Roughly this should cost you £250-£300 per peak month a...
By ASHP-BOBBA , 5 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
@toodles Thank you for your input. As the days have got...
By Synthbuilder , 9 hours ago
-
RE: Fan unit Making terrible noise HELP!!
@gutoffowc Oh no, sorry to hear that, are you in the Ke...
By ASHP-BOBBA , 11 hours ago
-
RE: Sunsynk Whole House Backup Issue
@sheriff-fatman - could you please re-post that in the ...
By Transparent , 11 hours ago
-
RE: Running my new Nibe ASHP efficiently
I didn't. I spent a while manually messing around with ...
By jamieheatpumpnew , 13 hours ago
-
RE: I’m glad the cold spell is over!
I comparison with the 65kWh used above yesterday was on...
By Judith , 13 hours ago
-
RE: Octopus Cosy 12 Heat Pump Regret: Incredibly Loud, Poor Heating & Constant Hum - Help!
I should think so, I thought that pretty much universal...
By JamesPa , 14 hours ago
-
RE: Setback savings - fact or fiction?
I'm also inclined to look into how a defrost is actuall...
By cathodeRay , 14 hours ago
-
MLCP (Multi-Layer Composite Pipe) for ASHP
@editor nope. The info you reported was sufficient for ...
By iotum , 1 day ago
-
RE: Experience - New Build / Complete New Heating System
@vincro I would be surprised if it is much above 5 to 6...
By ASHP-BOBBA , 1 day ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
Yes bang on and maybe I can illustrate that by way of e...
By iotum , 1 day ago
-
