Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 12, 2026
The only viable solution for a radiator to be warm enough to dry towels and heat a bathroom sufficiently is an electric radiator. There was no other ...
@majordennisbloodnok I too have received the email from Ofgem re the RHI. It clearly states within the email that it's for information only and no ...
Like @pash44pump I would be interested in recommendations for a service engineer in the Derby area for my Ecodan 11.2 ASHP.
My heating isn't 'ON' yet, although it is firing up in the early hours for an hour or two. However, I have every intention of firing up the log burner...
@dgclimatecontrol I have no intention of removing the cover. As you suggest, way too daunting for me. Thanks for the input. Appreciated.
@hcas all well and good but the majority of us, myself included, have no idea how to even identify, locate and then fix the issue with these sensors. ...
@thundermink can you provide photos to illustrate your fixes please? I wouldn't know where to start looking for temp' sensors or liquid sensor TH3 on...
Do you have both the Mitsubishi Ecodan FTC Wireless Receiver PAR-WR61R-E and the Transmitter PAR-WT60R and have them paired?
@dgclimatecontrol Many thanks for that info. Looks like I will be sticking with the original then.
@davidalgarve If they are 'off' because of a timed schedule, and this is their time to be 'off', it might be that it is actually in its 'idle' mode...
@davidalgarve My DHW is switched on.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
I agree. However I would also (primarily) expect that ...
By JamesPa , 9 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
You should (almost) always reject having a buffer, by w...
By JamesPa , 12 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 16 hours ago
-
RE: Is it the house or the equipment?
@majordennisbloodnok I do sympathise. On the original...
By springswood , 18 hours ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 22 hours ago
-
Sorry to hear about the problems, its going to be somet...
By JamesPa , 23 hours ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 2 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 2 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 2 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 3 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 3 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 3 days ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 4 days ago
SPONSORS
