Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 8, 2025
Guilty as charged. If it's cold our heating comes on, July or not. And it did.
Derek, John Cantor reckons 4-5% in his video if I recall. I had a go at quantifying it last year and came to a similar conclusion
maybe but remember it will allow the temp to rise to more than the WC max by the amount in the temp diff - unless limited by the maximum allowed. So ...
If you press this you get to this (or at least I do!)
P38 of the manual in the link I set the max-min to 20-43, the interval to 30 and the temp diff to +-5. It's a bit of a mystery how AA act...
Right hand button of the 4 on the main controller once then again to get into the detailed power consumed and delivered readings.
Yes it does seem strange that is doesn't always display room temp. I like auto adaptation. It's good to be able to vary the room temperature direct...
It looks like someone had a bath about 6pm and didn't turn the tap off properly. After the 'bath' the tank heats up immediately, then slowly cools dow...
I missed this before but you need to put the system in room temp mode to display the room temp. Yours is on weather compensation and in that mode the...
@minos, You won't get anything like accurate figures with such low usage unless you have external power (consumed) and heat (delivered) meters. The...
I asked and this was the reply Check that room and temp is selected in the controller. Go to menu, initial settings, temp display, then change to ro...
- 27 Forums
- 2,774 Topics
- 65.4 K Posts
- 930 Online
- 7,176 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
@editor firstly i want a heat pump but tbh you've put m...
By mrkfm , 37 seconds ago
-
Cooling using an air to water heat pump
Is it possible to get cooling with a heat pump on a sta...
By mrkfm , 13 minutes ago
-
RE: Passiv Smart Thermostat - Help & Forum Support
Hi @singlespeed That's fine we have installs where the ...
By Will H , 2 hours ago
-
Analysis of the economics of switching to an A2W ASHP compared to other heat sources
This post aims to analyse the economics of installing, ...
By Rob of York , 3 hours ago
-
RE: Why are ASHP installs so expensive?
Looking at it another way, do we think heat pump instal...
By scrchngwsl , 4 hours ago
-
RE: Cooling with air to water heat pumps
@editor does that mean you have to have two separate ex...
By mrkfm , 18 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
Posted by: @ian-s Could always use the money saved o...
By Rob of York , 23 hours ago
-
Depends on what controls the pump! Thats the whole poi...
By JamesPa , 1 day ago
-
The positive reviews keep coming in for Britain's Heat ...
By Mars , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
I have one of these fitted which also allows you to reg...
By Old_Scientist , 2 days ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
If they can't don't give up. Heat pumps are, in reali...
By JamesPa , 3 days ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes that's what would happen by turning down the lsv to...
By JamesPa , 3 days ago
-
RE: Grant R290 DHW Cycle Interuption
It looks like some sort of short pre-run. The question...
By JamesPa , 3 days ago
-
RE: Cascade System or larger single unit
@renewables345 I would say if it a new build it’s no mo...
By Aventus Eco , 3 days ago



