Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Dec 2, 2021
Batalto Interesting did your installer not say anything about the micro bore piping and flow rates when they installed the system Is the micro b...
Many thanks for the responses sorry should have said that half our radiators still have micro bore pipe to them so know we need to change this to get ...
Hi all who read this just for your amusement or frustration I have just had someone come and view our property to asses for a air source heat pump ...
Morgan & Graham Many thanks for your comments and agree on the situation but i have been trying to find an installer for many months now and ha...
Siko Many thanks for the reply and i fully agree with all your comments and there must be so many people in the same position who just give up R...
Dereck & Mars Again many thanks for the comments I have tried many MCS installers and managed to get one to come and view to check the room ...
@derek-m Many thanks i have done a lot of research for our project and as we live in a old large house we have a lot of rooms we dont need to heat ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Cooling/heating with one unit
"The way we use A2A on a cheap overnight EV tariff is t...
By mrkfm , 1 hour ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
We have ‘signed on the dotted line’ today for a Panason...
By Toodles , 2 hours ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
...or it was there and was lost thanks to laziness and ...
By Majordennisbloodnok , 2 hours ago
-
@bobflux Thank you for your response. I am trying to ...
By RonV. , 2 hours ago
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 6 hours ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 7 hours ago
-
RE: Heat Geek installations: share your experiences
I struggled with this problem as well. An independent t...
By L8Again , 8 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 9 hours ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 10 hours ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
@temperature_gradient Isn't that just describing a regu...
By Prunus , 10 hours ago
-
RE: battery storage without solar
As of October 1st they need specific qualifications to ...
By EtchedPixels , 23 hours ago
-
RE: Renewables & Heat Pumps in the News
With regards to the BUS grant raid, I gave it more thou...
By ASHP-BOBBA , 24 hours ago
-
RE: Why are ASHP installs so expensive?
The whole system seems to work on the basis of...
By ian33a , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Good plan. If you can get half hourly meter readings a...
By JamesPa , 1 day ago
SPONSORS
