Last seen: Dec 14, 2025
@cathoderay & @transparent I have attempted to measure start up current spikes but don’t have high speed monitor devices. The monitor on our batte...
Another thread about noise on Vaillant when running on max in posts 56 onwards. Several good ideas from the Urban Plumber
Googling noise with ashps and found this technical document/p> it identifies several noise related issues
@lucia I’ve started reading the work of Dieter Helms a centrist Oxford economics professor He did a cost of energy review for the government and ha...
yes I realised later! It gets eye watering in cold snaps doesn’t it?
Hi again @jaynieq I hope your daily consumption has gone down to the point where you can see that it will average out the horrible very cold days. ...
Can I check I’ve understood the arguments here? Large heat pumps are more efficient for some manufacturer’s ranges, I accept that. And if the contro...
Ofgem is consulting about their current work programme so perhaps we should tell them to change this system within their work plan. “Shaping a retai...
You can help things by putting the DHW on to a timed operation so it’s only topping up before you need it, not continuously, then your system can be u...
The exact waveform does matter too much it’s the average that matters. I can’t read the scale too well but both shapes look reasonable. There’s no ne...
I suspect it’s not reflective to audio waves and rough surface matting is available too. Patterned door mat perhaps ☺️
With a temperature difference on flow and return of 8C is the Aira able to operate comfortably with that? or are they using hydraulic separation I.e....
- 26 Forums
- 2,342 Topics
- 53 K Posts
- 312 Online
- 6,000 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Controlling Daikin Altherma via P1P2 and Home Assistant
@majordennisbloodnok That’s correct. I can’t find anywh...
By weoleyric , 35 minutes ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@andrewj yeah we recreated it. Engineer seemed to think...
By swwils , 2 hours ago
-
A while back I had a Y strainer fitted on the external ...
By jeegnesh , 2 hours ago
-
RE: Free Ecoheat Heat Pump Install
This is an interesting way of looking at it, and I can ...
By Mars , 4 hours ago
-
RE: Configuring third party dongle for Ecodan local control
That's a good spot and a valuable insight, @sheriff-fat...
By Majordennisbloodnok , 4 hours ago
-
RE: Are We Sleepwalking Into Another Race to the Bottom?
@majordennisbloodnok And did ‘Honey’ order it for you? ...
By Toodles , 5 hours ago
-
RE: Setback savings - fact or fiction?
@robs — thanks again for your detailed comments. Some r...
By cathodeRay , 18 hours ago
-
RE: A Smarter Smart Controller from Homely?
@papahuhu I hope you get a swift resolution. Regards, T...
By Toodles , 22 hours ago
-
RE: Poll for Time of Use, tariffs, technology
That’s fine by me too Major, I feel it is a sad reflect...
By Toodles , 23 hours ago
-
Bingo. Sometimes a judiciously placed size 10 bovver bo...
By Majordennisbloodnok , 24 hours ago
-
RE: Mitsubishi Ecodan 11.2kW heat pump with low COP
@ciocoiu-alexandru I can't provide the same level of di...
By Sheriff Fatman , 24 hours ago
-
The three technical issues I'm considering are: BMS...
By Transparent , 1 day ago
-
RE: LiFePO4 lithium battery fires and explosions
@transparent Your post may fit better in th...
By Batpred , 1 day ago
-
RE: British Gas vs Octopus Energy vs Heat Geek vs EDF vs Aira vs OVO vs EON.Next vs Boxt
@jamespawhite, if you could be bothered, you could also...
By Mars , 1 day ago
-
RE: Commencing on an ASHP Installation Process
I've got a bit of time to draft something today, so the...
By Sheriff Fatman , 2 days ago
-
RE: Help with heat pump sizing
@amin I dont think materially relative to t...
By JamesPa , 2 days ago
-
@majordennisbloodnok I have decided to take the plunge....
By TechnoGeek , 2 days ago
-
RE: Different dT on each radiator?
I cant sorry. Its based on some calculations I did fro...
By JamesPa , 3 days ago
