Last seen: Jan 19, 2024
I’m very happy with comfort, not so sure on cost. Averaging total elec consumption of 50-60kwh/day so probably around 45-50kwh for the heat pump (can’...
In case anyone is still interested! Mitsubishi have confirmed my controller is indeed one of those without energy consumption measuring and will repla...
@sunandair I think it is a form of modulation as with the mild temps at the moment it’s been very comfortably at the target temp even first thing in t...
@mikefl thank you! Yes I think I’ll do that, and then maybe run a quick legionella cycle on return. And hope it’s not too cold when we get back so we ...
@sunandair so I ran at 36c fixed for an hour 10-11 and then back to WC at 32 min 11-12 with similar results! Perhaps I was too impatient and needed to...
@sunandair I have just set a FFR of 36 so will report back in an hour or so on what that does! Yesterday was cycling pretty consistently twice an hour...
@sunandair yes I will press them! Last time I called and was 7th in the queue and didn’t have the energy to wait (no pun intended), but I will push to...
@sunandair thank you that’s very helpful! Appreciate you doing the calcs for that, feels like there is always something new to learn. I’ll definitel...
@sunandair yes, hopefully I’m a bit savvier than I was in that first post! all your assumptions are basically correct. Minimum output is 4.2kw, all ...
@gary thanks Gary, yes I saw that you said that before which is what made me wonder. Your explanation makes sense - I will keep an eye on it then to m...
Mine has cycled quite steadily twice an hour today in these warmer temps. I’ve lowered one end of the curve to 30 now (so now at 42/-4, 30/15). A coup...
Latest Posts
-
RE: Replacing my 18 month old Hitachi Yutaki ASHP
A big thank you to @jamespa for all his efforts online ...
By trebor12345 , 9 minutes ago
-
Daikin DHW Margin - what is it?
Our Daikin Altherma 3 Monoblock has DHW settings for bo...
By Pipcart , 30 minutes ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
@deltona I did draft a long point by point response ...
By JamesPa , 34 minutes ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor It is indeed for servicing. My current service ...
By Morgan , 1 hour ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
@transparent Thanks, I think I now get it. I am sor...
By JamesPa , 1 hour ago
-
RE: Sunsynk Whole House Backup Issue
Hi @lostandconfused , I agree that topic/thread is the ...
By Batpred , 1 hour ago
-
RE: Speedcomfort radiator fans
In case it helps Andrew Kuhne on openenergy monitor has...
By JamesPa , 2 hours ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
@jamespa, we have got this topic, which all the mods ca...
By Mars , 4 hours ago
-
Things have gone quiet with you @drei. Any updates?
By Mars , 5 hours ago
-
RE: Passiv Smart Thermostat - Help & Forum Support
Thanks @tim441. Interesting timing, as Passiv are a cur...
By Mars , 7 hours ago
-
Hi everyone, I have a two year old Marlec Solar iBoos...
By Tallmarc , 9 hours ago
-
RE: Please help with the settings ecodan
Are you trying to address any particular performance is...
By Sheriff Fatman , 15 hours ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
🤣 Well, I never managed to get the HA solis "...
By Batpred , 16 hours ago
-
RE: Experience - New Build / Complete New Heating System
Your sap clculations should give you a heat loss figure...
By JohnnyB , 16 hours ago
-
RE: Vaillant aroTherm not heating with many faults
@editor hmmm, our engineers Rae, Craig, Naz, Rob and Ry...
By ASHP-BOBBA , 17 hours ago
-
RE: I’m glad the cold spell is over!
@editor as a reply for this date the 6th of Jan in o...
By Nursethescreens , 19 hours ago
-
RE: Heat loss based on gas usage
@jamespa Thanks. The numbers posted above were jus...
By Bash , 19 hours ago
-
RE: Heat pump not reaching flow temperature
I would describe this as either a fault or a configurat...
By JamesPa , 20 hours ago
