Last seen: Jan 9, 2026
@johnr This what I find a bit confusing, I thought that if the temps are the same or a small DT then no heat is leaving the emitter it is just flushin...
The reason I tried to balance the system is that I have no confidence in the install. I know you are meant to run the system as wide open as possible ...
Cheers @toodles I suspect that some of this install is merely “new” to us! I am currently looking at building my own homely “clone” using Home Assist...
Cheers @Toodles, the flow rate at the minute is roughly 25/26 l/min (such a rubbish gauge!) flow temp 36c, return 33c and the pump is belting out 4,30...
Well after a quick run around, bled the rads again (should have done that after I found another leak yesterday mid balancing!). I have opened all the ...
@jamespa Thanks for the words of encouragement I dialled down the weather comp to 38c @ 0c last night and even though it was 0 outside the house neve...
@uk_pete_2000 no worries I am really standing on the shoulders of giants here and just trying to get it to work for me so happy to share.
@davidm06 a bit more detail here.
@uk_pete_2000 Sorry I should have explained better that is the reading off the modbus register 33 “indoor temperature master actual” which I think is ...
@uk_pete_2000 to be honest we are still learning so trying to find the best place for it however this is mainly redundant now as we have moved over to...
@davidm06 We still have no idea, the guy who came around the other day meant to tell us about it but got distracted and left without telling us. In th...
- 26 Forums
- 2,417 Topics
- 54.8 K Posts
- 425 Online
- 6,096 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Ideal HP290 14kW ASHP - how to optimise
Thanks everyone so much for your replies and help. Last...
By cmartinbwmba , 20 seconds ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
Reposted query from another thread requested by @transp...
By Sheriff Fatman , 21 minutes ago
-
RE: Sunsynk Whole House Backup Issue
@sheriff-fatman - could you please re-post that in the ...
By Transparent , 27 minutes ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
@robs Just to quickly fill in some of the gaps in the r...
By Sheriff Fatman , 59 minutes ago
-
RE: Fan unit Making terrible noise HELP!!
@ashp-bobba The fan unit has now died. ESP says it's no...
By GutoFfowc , 59 minutes ago
-
RE: Running my new Nibe ASHP efficiently
I didn't. I spent a while manually messing around with ...
By jamieheatpumpnew , 2 hours ago
-
Hi, I think I’m having some issues with my Ecodan as...
By Patch321 , 2 hours ago
-
RE: I’m glad the cold spell is over!
I comparison with the 65kWh used above yesterday was on...
By Judith , 3 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
@synthbuilder Further to the above…‘What a difference t...
By Toodles , 3 hours ago
-
RE: Octopus Cosy 12 Heat Pump Regret: Incredibly Loud, Poor Heating & Constant Hum - Help!
I should think so, I thought that pretty much universal...
By JamesPa , 3 hours ago
-
RE: Setback savings - fact or fiction?
I'm also inclined to look into how a defrost is actuall...
By cathodeRay , 3 hours ago
-
MLCP (Multi-Layer Composite Pipe) for ASHP
@editor nope. The info you reported was sufficient for ...
By iotum , 14 hours ago
-
RE: Experience - New Build / Complete New Heating System
@vincro I would be surprised if it is much above 5 to 6...
By ASHP-BOBBA , 15 hours ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
Yes bang on and maybe I can illustrate that by way of e...
By iotum , 17 hours ago
-
-
RE: Replacing my 18 month old Hitachi Yutaki ASHP
A big thank you to @jamespa for all his efforts online ...
By trebor12345 , 20 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor It is indeed for servicing. My current service ...
By Morgan , 21 hours ago
-
RE: Speedcomfort radiator fans
In case it helps Andrew Kuhne on openenergy monitor has...
By JamesPa , 22 hours ago


