Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 23, 2026
Yes - I had my eye on a Tesla charger just N of Norwich at 52p/kWh, but our plans changed and it was no longer on our route.
I agree that range anxiety goes away after a few months with an EV, and I am now OK with running the SoC down below 10% on longer trips. But it's no...
I use the MELcloud app only to set the time schedules for heating. I vaguely remember the installer saying use one or the other, not both. I have a...
A few comments: 1 MCS - my solar/battery installer wasn't accredited initially and I couldn't open an export tariff with Octopus until they were. ...
Very interesting! I have noticed that the Octopus meter reading department and the tariff department don't exchange data because I have been on Agile...
We have a regular water meter which was installed when the property was converted in 1991. After about 10 years, the meter failed and was replaced. ...
As I have reported elsewhere, we replaced all our glass with vacuum glazing from LandVac last year. We were fortunate to have smallish wooden frames ...
This is how my system is arranged, with a three port valve that switches the HP flow either directly to the DHW or to the buffer when in heating /cool...
@editor No objection from me to using AI if it spreads the word. I personally use Perplexity quite a bit and find it helpful. But as others have m...
@pie_eater Try asking the Perplexity AI engine how to turn on cooling on your specific model. It's available through your web browser or as a free iO...
@comfortablehomeseeker I have the usual combination of insulation under the suspended ground floor and no insulation where pipes are in the heated spa...
@iaack yes there's no denying that cold air sinks! I suppose that's why aircon units are mounted high up. The Jaga units are able to produce quite ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
Volumisers are normally plumbed so that they are in the...
By JamesPa , 3 hours ago
-
@toodles possibly. The £9k labour charge for 4-5 days w...
By AndrewJ , 7 hours ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 11 hours ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 1 day ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 1 day ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 1 day ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 1 day ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 5 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
SPONSORS
