Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 23, 2026
Thanks. But what is the downside? I have been with 2 energy companies that failed and they just get mopped up by someone else - that's how I ended u...
I assume you don't have any useable loft space for the DHW tank? We installed a Mixergy 210l in our loft when the Ecodan was installed 18 months ago ...
@greenlover75 slightly off topic but has your architect considered vacuum glazing? This fits in existing frames and has been approved for listed pro...
@toodles Yes I was on Agile last Jan and still am. Jan 2024 I used c2000kWh and Agile cost was around 50% of Flexible. Jan 2025 I used almost exac...
Yes much lower volume in the rads. So the system heats up quickly. We have a 100l buffer but I think that was in the default design anyway. You can...
Yes each Jaga needs a power supply but there is room inside the casing for the small transformer - the controller and fans use 24V DC. I installed a ...
Are you aware of Jaga Strada fan-assisted rads? We have them fitted throughout and are very happy. Heat output is much greater per unit area than no...
My 14kW Ecodan is defrosting about every 2 hours this morning. Once at 0730 and then again at 0930 (see attached). Conditions are 3C and 88% humidi...
Thank you - I wasn't aware that clicking /tapping the legend on the MELcloud graphs would turn the plotlines on and off! I was missing the return tem...
Yes I take your point. However, with an ASHP and batteries controlled on Agile by MyEO, I don't think it would be worth tinkering with my usage and t...
@toodles regarding the actual cost of power on the Agile tariff, are you aware of the OctopusCompare app? This gives you your actual half-hourly usag...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 1 hour ago
-
@kilgorexv, I actually think doing your own calculation...
By Mars , 1 hour ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 16 hours ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 1 day ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 2 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 2 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 2 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 5 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 6 days ago
SPONSORS
