Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 5, 2026
Samsung 16kw has been working well at home in Perthshire for the 1st year since commissioning, though made the error of turning things down while away...
Thanks for your full reply @mike-h. It certainly cleared up most thoughts thoughts. When the heat pump heats DHW the flow temperature will peak i...
@dgclimatecontrol thanks for the reply. subesequent reply from Mike_H says legionella cycle is done by the imersion which makes sense to me. Not sur...
Where to start? In brief we are happy with the system, the house is warm enough for us but not too warm. DHW is fine for showers and washing up now...
@jamespa just confirming that after 5months with the 16kw Samsung installed we are happy with the DHW and heat, though I've a stack of "for interest" ...
I'm using smarthings for our Samsung 16kw, and it really is very basic. I can change the running mode for heating and DHW, or say when we are away (f...
Unless anyone can tell me differently, there appears to be no way to download data from the Samsung smarthings app so I too transfer data to a spreads...
@jamespa Hi, No major issues just learning to live with it I guess. Not sure how to answer the weather comp question Hot water temp is fine...
Forum Handle:@DowallyDrifter Manufacturer: Samsung Model: AE160CXYDEK (MCS: EHS R290 16KW) Type: ASHP Arrangement: MONO Area of Country: PER...
@abernyte thanks tbh I was more thinking about bolstering the insulation within the timber frame which would entail removal of plasterboard etc. and ...
@bontwoody results from the simple calculator point toward 16.5kW heat pump plugging in U values from original docs. walls 0.45, roof 0.24, windows...
@jamespa oil varies 2500-4000 litres a year for boiler and aga, ca. 4 cu.m wood p.a. Original design for UFH showed outside walls with K=0.45 W/sq.m/K...
- 27 Forums
- 2,767 Topics
- 65.2 K Posts
- 460 Online
- 7,169 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Posted by: @grahamf if you are planning to install a...
By Rob of York , 8 minutes ago
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist I changed this morning, it’s much qui...
By Papahuhu , 1 hour ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s One interesting difference between your two q...
By Rob of York , 4 hours ago
-
RE: Is it the house or the equipment?
All very good advice, thanks again @rob-of-york You'...
By springswood , 4 hours ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 6 hours ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 1 day ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 2 days ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 3 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 3 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 3 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 3 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 3 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 4 days ago



