Last seen: Jan 12, 2026
The gaps and holes have reduced on heat pumps over the years. many we have installed are in rural areas and earlier units often allowed access. We've...
@ashp-bobba Brilliant, sounds great
@ashp-bobba good advice and thoughts. It depends what the customer is really looking for and their circumstances. A2A will always be cheaper to instal...
@majordennisbloodnok The drying out of air shouldn't happen if operated correctly on a good install, its often worse with high temperature radiators. ...
@majordennisbloodnok Sounds like a poor install unfortunately. The ducted systems are often even better than wall mounts as virtually silent and nothi...
@editor While I understand that point, its often where they are sited, the units capacity and how they are operated. Panasonic for instance has a Quie...
@heat-pump-newbie Yes you need F Gas engineers like us if a split or monoblock system. Otherwise they just service the heating side of things.
@morgan They may be good but cannot service the heat pump as they don't appear to be F Gas reg, therefore cannot leak check and limited to what they k...
@old_scientist Probably okay if they are servicing the heat pump too, often they just service the heating system indoors as not F Gas qualified. We ch...
Ive called most of them over the years. By far the best seems to be Panasonic, very helpful, calls back if needed and parts required next day delivery...
@jamespa I've tried to find the email but deleted it which means the attachment goes It was quite detailed and did state things that are not quite ac...
Latest Posts
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In the Home Assistant firmware the data points...
By F1p , 2 minutes ago
-
RE: Ecodan Pump Issues… Circulation pump turns off when heat pump compressor turns off
Interesting and great that you are able to run experime...
By JamesPa , 10 minutes ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@johnbroome if it is not the pressure in the expansion ...
By ASHP-BOBBA , 17 minutes ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
In recent cold weather th...
By JamesPa , 20 minutes ago
-
So I hear the export MPAN that UKPN assigned should be ...
By Batpred , 3 hours ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
From what I read, the Solis has a very long list of err...
By Batpred , 3 hours ago
-
RE: Ideal HP290 14kW ASHP - how to optimise
Roughly this should cost you £250-£300 per peak month a...
By ASHP-BOBBA , 4 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
@toodles Thank you for your input. As the days have got...
By Synthbuilder , 8 hours ago
-
RE: Fan unit Making terrible noise HELP!!
@gutoffowc Oh no, sorry to hear that, are you in the Ke...
By ASHP-BOBBA , 10 hours ago
-
RE: Sunsynk Whole House Backup Issue
@sheriff-fatman - could you please re-post that in the ...
By Transparent , 10 hours ago
-
RE: Running my new Nibe ASHP efficiently
I didn't. I spent a while manually messing around with ...
By jamieheatpumpnew , 12 hours ago
-
RE: I’m glad the cold spell is over!
I comparison with the 65kWh used above yesterday was on...
By Judith , 12 hours ago
-
RE: Octopus Cosy 12 Heat Pump Regret: Incredibly Loud, Poor Heating & Constant Hum - Help!
I should think so, I thought that pretty much universal...
By JamesPa , 13 hours ago
-
RE: Setback savings - fact or fiction?
I'm also inclined to look into how a defrost is actuall...
By cathodeRay , 13 hours ago
-
MLCP (Multi-Layer Composite Pipe) for ASHP
@editor nope. The info you reported was sufficient for ...
By iotum , 24 hours ago
-
RE: Experience - New Build / Complete New Heating System
@vincro I would be surprised if it is much above 5 to 6...
By ASHP-BOBBA , 1 day ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
Yes bang on and maybe I can illustrate that by way of e...
By iotum , 1 day ago
-
