Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@guthrie The red and white vessels will be expansion tanks, one for the heat pump water circuit and the other fro the Domestic Hot Water (DHW). To...
@cathoderay Have a look at page 143 of the attached manual.
Welcome to the forum. I cannot see an error 01 in the manual for an Ecodan, which may or may not be relevant. When you say the heat pump is running...
@cathoderay It is quite simple really. Like decimal, binary can be represented in rows and columns. Decimal. Binary. Tens. Un...
A further factor to consider is how the setback is achieved. If it is by using the WC offset, it may just be reducing the LWT by the offset, and raisi...
@cathoderay I fully agree that the heat loss will reduce as the IAT reduces at a constant OAT. If the LWT is now returned to the value it was prio...
@cathoderay Many thanks Ray.
@cathoderay If you can provide all the variables covering the past week at 1 minute intervals that should be more than adequate.
What you suggest is fine whilst the weather is reasonably mild, although inclement. My concern would be when the temperatures get colder, the IAT woul...
I suspect the recovery is taking longer today because the IAT was lower, and because you are limiting the permitted LWT increase to 3C, this in turn i...
@sunandair I suppose the starting point would be to try to ascertain if your desired control philosophy is actually achievable. If you expect (as ...
@josephiah When the clocks changed, did you manually change the time on the controller or did it occur automatically? Try changing the time back to ...
- 27 Forums
- 2,815 Topics
- 66.7 K Posts
- 3,590 Online
- 7,230 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Plug and play solar. Thoughts?
@singlespeed, what are your initial thoughts?
By Mars , 18 minutes ago
-
-
@batpred The Daikin temperature probe protrudes from th...
By Toodles , 2 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor And as an occasional contributor, may I say wel...
By Toodles , 4 hours ago
-
RE: Should Households Who Can Afford It Pay More for Energy to Help Those Who Can't?
They don't have to try. Our entire system is d...
By EtchedPixels , 5 hours ago
-
RE: Why don't people choose heat pumps?
Fair enough. I guess I was thinking of pipes that run ...
By JamesPa , 5 hours ago
-
RE: How Can I Prove Coal Was My Main Heating Source Without Receipts?
Got excepted for the grant now so thanks for the replie...
By Chilli304 , 9 hours ago
-
Daikin Altherma 3 R F+W, room thermostat control, weath...
By JanHarley , 10 hours ago
-
RE: Buffer tank on a 2 x 14kw Ecodan system
Pretty much as I had guessed in my crude scaling from m...
By JamesPa , 13 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Well you have a vibration generator running at some fre...
By bobflux , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@downfield Thats a decent rate, I’m shocked they hadn...
By Papahuhu , 2 days ago
-
RE: Adventures in heat loss calculations
@toodles thanks! So as suspected, around a doubling of ...
By SusannaSaunders , 2 days ago
-
Six books in three years and I think I’ve now covered j...
By Mars , 2 days ago
-
RE: Grant Aerona3 13kw - Buffer Tank - Heating Journey
@heymikey Well done in achieving as nearer a match acro...
By Toodles , 2 days ago



