Last seen: Sep 19, 2024
@marzipan71 Hi Steve, You are correct that the two thermostats should be set to say 25C, so that the heat pump is always enabled. It is not you....
@kev-m I think that I am correct in assuming that the graphs show the energy input to the heat pump, which if that is the case, then the result will...
@kev-m Hi Kev, If you Google PAR-W21MAA you should get a list of manuals if you wish to explore further. If you need any help then just let me kno...
I think that you may need to ask Freedom to clarify exactly what they mean by 'hydraulic separation', since of the three items listed, only a PHE will...
Maybe you should ask Fergal why it is short cycling.
@marzipan71 Hi Steve, I need to go out this afternoon, so I will try to answer your questions later.
@enc Hi Emma, The hot water cylinder is filled with the water used for showering and at the hot taps, but also inside the hot water cylinder is a ...
The hot water in the cylinder is not used in your central heating system. Is your hot water being heated by your heat pump or by an immersion heater...
Ice formation on the Evaporator heat exchanger is to be expected, particularly when there is high humidity in the ambient air and the temperature is b...
I don't think the radiators will have been installed when the house was built. 🙄 Give one of the radiators a close inspection and see if there is a ma...
Hi Everyone, Some time ago I carried out some research on buffer tanks, LLH and PHE, and watched some quite interesting YouTube videos, posted by pe...
@marzipan71 Hi Steve, I remember you saying that you have an indoor Daikin unit as well as the outdoor unit, so it would appear that you have what...
- 26 Forums
- 2,418 Topics
- 54.8 K Posts
- 339 Online
- 6,098 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Ecodan Pump Issues… Circulation pump turns off when heat pump compressor turns off
@jamespa sorry James, yes larger surface area, messing ...
By ASHP-BOBBA , 1 minute ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In the Home Assistant firmware the data points...
By F1p , 8 minutes ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@johnbroome if it is not the pressure in the expansion ...
By ASHP-BOBBA , 22 minutes ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
In recent cold weather th...
By JamesPa , 25 minutes ago
-
So I hear the export MPAN that UKPN assigned should be ...
By Batpred , 3 hours ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
From what I read, the Solis has a very long list of err...
By Batpred , 3 hours ago
-
RE: Ideal HP290 14kW ASHP - how to optimise
Roughly this should cost you £250-£300 per peak month a...
By ASHP-BOBBA , 4 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
@toodles Thank you for your input. As the days have got...
By Synthbuilder , 8 hours ago
-
RE: Fan unit Making terrible noise HELP!!
@gutoffowc Oh no, sorry to hear that, are you in the Ke...
By ASHP-BOBBA , 10 hours ago
-
RE: Sunsynk Whole House Backup Issue
@sheriff-fatman - could you please re-post that in the ...
By Transparent , 10 hours ago
-
RE: Running my new Nibe ASHP efficiently
I didn't. I spent a while manually messing around with ...
By jamieheatpumpnew , 12 hours ago
-
RE: I’m glad the cold spell is over!
I comparison with the 65kWh used above yesterday was on...
By Judith , 13 hours ago
-
RE: Octopus Cosy 12 Heat Pump Regret: Incredibly Loud, Poor Heating & Constant Hum - Help!
I should think so, I thought that pretty much universal...
By JamesPa , 13 hours ago
-
RE: Setback savings - fact or fiction?
I'm also inclined to look into how a defrost is actuall...
By cathodeRay , 13 hours ago
-
MLCP (Multi-Layer Composite Pipe) for ASHP
@editor nope. The info you reported was sufficient for ...
By iotum , 24 hours ago
-
RE: Experience - New Build / Complete New Heating System
@vincro I would be surprised if it is much above 5 to 6...
By ASHP-BOBBA , 1 day ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
Yes bang on and maybe I can illustrate that by way of e...
By iotum , 1 day ago
-

