Last seen: Sep 19, 2024
Okay Dave, If your system is out of warranty then the first problem is easily resolved. At a convenient time, power your system down, wait 10 minute...
@davew Hi Dave, Obviously if it was my system I would have probably installed it myself and confirmed that the wiring was correct. You are indeed ...
Is the blue line the setpoint and the black one the measured value? What is the resolution of the display, is it +/- 0.5C or +/- 0.1C? Edit. I thi...
So as you stated, the compressor is making a soft start at 36Hz, and then gradually ramping up to 52Hz, where it appears to remain constant, until the...
@cathoderay As you have probably noticed, I have been busy answering queries from new forum members, though I have been giving some thought to your ...
Out of interest, what is the setting of the 'room temp control' time interval on your system?
How is your system set to operate at the moment? Is it in heating or DHW? Do you intend to provide the requested photo's? Do you have any thermometers...
Thank you, good thinking. It would be useful to compare your findings with other systems if anyone has the time to spare. I presume that this is compr...
I presume that you have them switched off or disabled at the moment?
Thanks Mike, much appreciated. 👍
As usual the words sound quite good, and are in the correct order, but I suspect they will have the same set of idiots try to put the words into pract...
- 26 Forums
- 2,372 Topics
- 53.8 K Posts
- 200 Online
- 6,053 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Testing new controls/monitoring for Midea Clone ASHP
Seems to be the only logical explanation. Our ASHP was ...
By benson , 3 minutes ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles I sail, so have a feel for what wind can do. A...
By Papahuhu , 7 minutes ago
-
RE: Radiator sizing sanity check
@jamespa thanks, yes it seemed mad to me. An exert f...
By Papahuhu , 41 minutes ago
-
RE: Optimum new build house design for Heat Pump
From first principles I would say: Definitel...
By JamesPa , 2 hours ago
-
RE: Cascade 2x Grant Areona 10kw ASHP - Ongoing setup issues
This is actually normal, or at least its more or less w...
By JamesPa , 2 hours ago
-
RE: Weather compensation- why you should use it
As good a place as any to drop this video:/p>
By Mars , 5 hours ago
-
RE: Forum updates, announcements & issues
@transparent D'Oh - I did look before I posted but I mi...
By dr_dongle , 7 hours ago
-
Compatibility with Samsung AE080RXYDEH
I am new to all this. We have a SamsungAE080RXYDEH that...
By John999 , 7 hours ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred Maybe you should buy your additional batter...
By Bash , 8 hours ago
-
RE: Data Accuracy Problem: Daikin 8kW Heat Pump's Onecta App vs MMI Power Consumption
@nursethescreens Yes, comfort and happiness of the fami...
By Toodles , 9 hours ago
-
RE: Connecting Growatt SPH5000 over wired ethernet rather than wireless
Thanks folks. I had tried googling an ethernet lab adap...
By z8lccda , 23 hours ago
-
RE: Changing from 4-port buffer to volumizer
@toodles I'm not concerned that the behaviour is not no...
By Andy1618 , 24 hours ago
-
-
RE: Setback savings - fact or fiction?
I agree, and I think there are two things in play here....
By cathodeRay , 1 day ago
-
RE: Water Hammer After Heat Pump Install
That's really helpful. Yor last sentence confirms it'...
By JamesPa , 1 day ago
-
RE: Help needed with Grant Aerona 3 issues
First time posting so bear with me. Some bits that have...
By Adamp , 2 days ago
-
RE: Mitsu PUHZ-SW120YHA + EHSC-VM20Uk - Performance
All understood. Obviously its a bit house de...
By JamesPa , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@majordennisbloodnok This may be a better thread to ...
By Batpred , 3 days ago
-
RE: Best Heat Pump Brand in the UK
Last Call to Vote & Win! Haven't voted for your Hea...
By Mars , 3 days ago
