Last seen: Sep 19, 2024
Precisely. Who is training the trainers?
Can the ESP32 accept PT100 Resistance Temperature Detectors? These are relatively cheap and quite accurate and could be obtained readily from TC Dir...
The objective would be to allow the concrete slab to heat your home with the heat pump off, until the indoor temperature starts to fall and the heat p...
@cathoderay I have had a little time to spare to have a further look at the structure of the messages, which I have put in the spreadsheet below. ...
I'm getting a strong whiff of bovine excrement and I am down in Yorkshire. I would suggest that your little sister should contact whichever body in S...
Obviously, no two homes are the same, so what works with one may not work with another. If you have a temperature sensor in the living area, you cou...
You obviously have failed your observancy test, since you failed to notice that I had not attached the referenced manual.
Actually I have just been looking at a different problem for a different forum member, and I would suggest that you check the freeze stat function, as...
The main water pump should be wired to OUT1 on terminal block TBO.1 connections 1 & 2 as shown on page B-46 of the attached manual. I would sugges...
You are one of the lucky ones to only have the one water pump, which would indicate that you don't have the unnecessary complexity that has been built...
I'm afraid that heat pumps and heatmiser's, and the like, don't play together nicely and are often fighting to prove who is in charge. If you would ...
The wiring diagram I studied recently, shows the main and any auxiliary water pumps wired to the main Mitsubishi control panel. Is that the case with ...
- 26 Forums
- 2,372 Topics
- 53.8 K Posts
- 249 Online
- 6,053 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Weather compensation- why you should use it
As good a place as any to drop this video:/p>
By Mars , 11 minutes ago
-
RE: Forum updates, announcements & issues
@transparent D'Oh - I did look before I posted but I mi...
By dr_dongle , 2 hours ago
-
Compatibility with Samsung AE080RXYDEH
I am new to all this. We have a SamsungAE080RXYDEH that...
By John999 , 2 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
@benson is using an esphome controller which integrates...
By Mosibi , 2 hours ago
-
Cascade 2x Grant Areona 10kw ASHP - Ongoing setup issues
I initially posted last winter and thanks to both the i...
By adam , 3 hours ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred Maybe you should buy your additional batter...
By Bash , 3 hours ago
-
RE: Data Accuracy Problem: Daikin 8kW Heat Pump's Onecta App vs MMI Power Consumption
@nursethescreens Yes, comfort and happiness of the fami...
By Toodles , 4 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 I have just realised that I omitted the Decembe...
By Toodles , 4 hours ago
-
RE: Connecting Growatt SPH5000 over wired ethernet rather than wireless
Thanks folks. I had tried googling an ethernet lab adap...
By z8lccda , 18 hours ago
-
RE: Changing from 4-port buffer to volumizer
@toodles I'm not concerned that the behaviour is not no...
By Andy1618 , 19 hours ago
-
-
RE: Setback savings - fact or fiction?
I agree, and I think there are two things in play here....
By cathodeRay , 24 hours ago
-
RE: Water Hammer After Heat Pump Install
That's really helpful. Yor last sentence confirms it'...
By JamesPa , 1 day ago
-
RE: Help needed with Grant Aerona 3 issues
First time posting so bear with me. Some bits that have...
By Adamp , 2 days ago
-
RE: Mitsu PUHZ-SW120YHA + EHSC-VM20Uk - Performance
All understood. Obviously its a bit house de...
By JamesPa , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@majordennisbloodnok This may be a better thread to ...
By Batpred , 3 days ago
-
RE: Best Heat Pump Brand in the UK
Last Call to Vote & Win! Haven't voted for your Hea...
By Mars , 3 days ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
Interesting question. To be frank, since I have no inte...
By Majordennisbloodnok , 3 days ago
-
RE: Ecodan unable to hit legionella target temp - what's the consensus?
@9jwr9 Hi, yes this is the issue with every (stand alon...
By ASHP-BOBBA , 4 days ago


