Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
Hi Richard, welcome to the forum. Having zones with individual room controls may seem desirable and may possibly be a good idea with a gas or oil bo...
@crustydoodle On first assessment I believe that the problem may be associated with one or more of the temperature sensors and possibly the settings...
@crustydoodle Thanks for the data. I will have a look through the list and see if I can make any suggestions.
@jamespa I have some further improvements that I wish to make, but once completed I will post a copy for dissemination.
@crustydoodle Did you record the list of controller settings?
@cathoderay One of the benefits of using simulations is the ability to vary one parameter, whilst keeping others constant, to see the effect of that...
@cathoderay You are indeed correct that the subject is rather complex, and I agree with much of what you have stated, along with the need to test so...
Don't you find it rather itchy? 🙄
Those seem reasonable for UFH, though you may wish to optimise the settings during the heating season. I would suggest that you now go through all t...
@crustydoodle The photo shows that your system is operating in WC mode, so I would suggest that you watch the video below to see what settings have ...
@crustydoodle A photo of the main screen may indicate the mode of operation.
@crustydoodle Do you have a buffer tank within your system? I presume your installer did not supply a list of all the controller settings? I pre...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Switch suitable to change between two inverter CT's
It depends An unloaded current transformer can output...
By bobflux , 11 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@batpred They offered both, I went with Pro. As an amat...
By baroquebank , 22 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 3 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 3 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 3 days ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 3 days ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 3 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 4 days ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 4 days ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 4 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 5 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 6 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 6 days ago
SPONSORS
