Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@majordennisbloodnok One way to establish a connection from a computer to the inverter is by using the following:- Is this what you had in mind...
@daniel Looking at your sketches, I cannot see any particular problem with the pipework arrangement. When you say that the radiators are getting w...
@riponowl The incorrect flowmeter will indeed be the cause of the inaccurate reading. If the system is indicating a flow rate of 13 lpm, the true ...
@majordennisbloodnok I will try to explain some of the information contained within the document I sent yesterday. Data Format: Data is passed b...
@majordennisbloodnok I don't have time to go into detail at the moment, but I should be able to do so tomorrow. I would suggest that you read thro...
@fazel I don't expect this behavior from the system and normally hitting the 'back arrow' return the text. On this occasion it did not. What I do ...
@majordennisbloodnok My blood pressure has now reduced somewhat. So you understand the need for the termination resistor. I believe that some devi...
I have just completed a lengthy explanation of the need for a 'termination resistor' only to have it disappear into a black hole when I went to send, ...
@newhouse87 One question that I forgot to ask, 'did your installer balance the flow through each of the loops to match the heat loss of that particu...
I would say in theory, no, it should not have much impact. Applying the laws of physics, the pipework at the flow end, where the water enters the pi...
I suspect it is more to do with the heating capacity rather than the number of loops. If you have the specified length of pipework installed, it shoul...
Hi Ian, Did you manage to automate the process? I can suggest a solution if you wish.
- 27 Forums
- 2,751 Topics
- 64.7 K Posts
- 1,903 Online
- 7,158 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Switch suitable to change between two inverter CT's
It depends An unloaded current transformer can output...
By bobflux , 6 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@batpred They offered both, I went with Pro. As an amat...
By baroquebank , 16 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 2 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 3 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 3 days ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 3 days ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 3 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 3 days ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 3 days ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 4 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 5 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 5 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 6 days ago
Members Online
No online members at the moment


