Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 24, 2026
@f1p Right now it is sitting next to Shelly Gen3 in the living room. The PAR 60 is reading 21.5 and the Shelly is reading 21.8 The detailed report...
@f1p1p I have checked both and believe them to be correct, (see photos), but I would appreciate your confirmation. I now think this was a false ...
@f1p Thanks for your interest. Yes it is set for Room RC1. I am going to move the Par 60 from the second coldest room in the house to an upstairs bedr...
@jamespa The only possible thing is the PAR 60 which should have no influence whilst on weather compensation and I have it set at 38 C, but who knows?
@bontwoody Hi bontwoody. The PAR 60 wireless controller cost a lot of time and agro to install and I wish that I had never considered Adaptive. Althou...
@jamespa Radiators:They were balanced to some extent, but I opened them up when it appeared that there was low flow. I have subsequently adjusted a...
@f1p Yes of course but may need some guidance. However we are having an unusual warm spell after the last two weather events moved through. Would it...
@jamespa Hello James and thank you for your interest. Before attempting to answer your questions, I feel I should make it clear that my problem is t...
@morgan Hi Morgan. Last year, operating on weather compensation and based on Mitsu figures, I was getting around 3.2 in December & January. When I...
@f1p You have better access to information than I have, but I took the information from the Ecodan Data Book, here:
@jamespa Thank James. Yes, buffer tank changed to volumiser and second pump removed. Very similar data at OAT of below 10C . It is currently runni...
@bontwoody Thanks for the suggestion, but DHW is heated at 5:00 am on reduced tariff and I don't think that can be happening because there is no sign ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
Volumisers are normally plumbed so that they are in the...
By JamesPa , 40 minutes ago
-
@toodles possibly. The £9k labour charge for 4-5 days w...
By AndrewJ , 5 hours ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 9 hours ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 23 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 23 hours ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 1 day ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 1 day ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 1 day ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 5 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
SPONSORS
