Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 24, 2026
@f1p Thank you very much for the information - most useful! Regarding “Recharge”, I only have one thermocouple fitted and it is in the lower socket ...
As you appear not to be too comfortable with how it has been set up, do the installers have anything to contribute? With the multiplicity of additio...
Changes may have been introduced on the FTC7 and my experience is with FTC6, but I have had some success with "pure" Weather Compensation on my Ecodan...
@sheriff-fatman Sorry that I missed your comment earlier. Yes the PAR 60 is working, but HW have revealed an aspect that I would have liked to have ...
@jamespa Thanks for your comments James. The answer to your question is not quite straightforward. We live mainly on the 1st floor which is either S...
@abernyte Thanks for your comments. My experience is mainly on weather compensation and latterly on a Melcloud trial which, I believe, uses AA in a mo...
@downfield I wonder if it is the MELCloud app that is the problem? It is not the greatest bit of software. I was using weather compensation all last y...
@hcas Hello Henri. It is disappointing, but I must presume that you were not persuaded with my suggestion of trying the PAR-60 in the upstairs living ...
@sheriff-fatman Thanks for that. Is the fact that you are calling for 27C a way of boosting what you would get from the weather compensation? I take i...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
Of course had the heat source been a heat pump it would...
By JamesPa , 36 minutes ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 3 hours ago
-
RE: Is it the house or the equipment?
@springswood We have two Daikin single split A2A syst...
By Rob of York , 4 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
You should (almost) always reject having a buffer, by w...
By JamesPa , 1 day ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 1 day ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 2 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 2 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 2 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 2 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 3 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 4 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 4 days ago
SPONSORS
