Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 8, 2025
How much oil do you currently use per annum to heat the bungalow and does that give a comfortable temperature?
I agree. It seems to me that an approach using both indoor and outdoor temperature to auto-derive and learn the optimum flow temperature and rate woul...
@alistairgbarron You are confusing water temperature (average temperature of water flowing through the radiator) with delta T which is the difference ...
All change - that house purchase fell through when the vendors changed their minds about selling. Today we complete on a 1977-built property in a diff...
Not my blog - I just thought it was interesting and relevant to the discussions on here.
@kk_777 I think a lot of the single-fan models are compliant, but most of the higher output double fan models aren’t. Of course, a lot of retrofits ne...
The Midea ones are all under 0.6m3 (just). Looked like whoever specified/made the UK versions did their homework.
I’d imagine it’s going to be economies of scale - if they can make the plumbing guts and physical packaging at low cost in the Far East (e.g.) then ad...
The info I could find had delta T70 (seeStelrad quote at delta T50 (and T30) Reina’s own website doesn’t say what the delta T is, the spec data is j...
- 27 Forums
- 2,756 Topics
- 64.9 K Posts
- 985 Online
- 7,161 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Good but - with your recirculating pump a high proporti...
By JamesPa , 10 minutes ago
-
RE: Missing flow temperature in Heat Geek proposal
I have just had a heat geek survey, with no radiator ch...
By David , 56 minutes ago
-
RE: Being screwed over by Volkswagen Audi Group
No worries, I can't really argue with your logic and I ...
By Old_Scientist , 3 hours ago
-
RE: 7kW EV Charger Options Advice
Thank you Rusty, all of those subtleties were lost on m...
By Judith , 8 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Flow rate is set by pressure created by the circulator ...
By bobflux , 1 day ago
-
RE: Glass lined Cylinder for private water supply
I have one of those... a Thermal Store. In my case th...
By Transparent , 1 day ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 1 day ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 2 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@kilgorexv definitely a larger inverter will help and m...
By AndrewJ , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 4 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
The installation is almost done! I've written up two ...
By tomasmcguinness , 5 days ago
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 5 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 5 days ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 5 days ago



