Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 17, 2026
@cliffhanger - thoughts on how to deal with your situation: I would still start with room stat set high and all TRVS etc open and then fine tune the w...
Keep it out in the open! Others will want to have a look and possibly comment. The heat loss report estimates the heat loss to be 7.42kW at -5.28°C ...
@jamespa - thank you for your ongoing heroic attempts to make sense of all this. I too had noticed this different behaviour. Here are the two per...
For completeness sake, and I may as well document it here as anywhere else, I have now done the other test I mentioned earlier for whether the two sam...
It may be be because the controller has been changed, and has gone to some albeit rather odd defaults. See if you can set them to what you had before....
And finally, the R version tidied up a bit and larger, so 95% confidence interval bands are more visible: The R code used (slightly different,...
Calculation based heat loss assessments are often particularly over the top for older buildings because the assumed U values for walls are just plain ...
Now we are all posting at the same time! One thing to add - I agree with @jamespa, there is no such thing as a ridiculously low curve, only a curve th...
@cliffhanger @editor - I would be inclined to ask how and why is the overshoot happening. I'd start by looking at the estimated heat loss, and how the...
Here's the same plot, less the R squared values, done quick and dirty in python, with the one done in R on the right: They look the same to me a...
SPONSORS
Degrees of Separation
Latest Posts
-
How quickly would you want/expect heat recovery to take from setback?
Now into year 2 with my Cosy 9. I currently have it se...
By AndrewJ , 12 minutes ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
Not quite, regular A2W heat-pumps need a load of extra ...
By Temperature_Gradient , 12 hours ago
-
RE: Heat Geek installations: share your experiences
one thing i learnt from reading people’s comments and e...
By Batpred , 14 hours ago
-
RE: Cooling/heating with one unit
"The way we use A2A on a cheap overnight EV tariff is t...
By mrkfm , 16 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
We have ‘signed on the dotted line’ today for a Panason...
By Toodles , 17 hours ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
...or it was there and was lost thanks to laziness and ...
By Majordennisbloodnok , 17 hours ago
-
@bobflux Thank you for your response. I am trying to ...
By RonV. , 17 hours ago
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 21 hours ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 22 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 1 day ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 1 day ago
-
RE: battery storage without solar
As of October 1st they need specific qualifications to ...
By EtchedPixels , 2 days ago
-
RE: Renewables & Heat Pumps in the News
With regards to the BUS grant raid, I gave it more thou...
By ASHP-BOBBA , 2 days ago
-
RE: Why are ASHP installs so expensive?
The whole system seems to work on the basis of...
By ian33a , 2 days ago
SPONSORS
