Search with Wattson
Activity
 
Notifications
Clear all

Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!

cathodeRay
cathodeRay
@cathoderay
Moderator
Famed Member
Joined: Feb 28, 2022
Last seen: Sep 10, 2026
Topics: 18 / Replies: 3023
Reply
RE: ASHP Retrofit in a 2015 house with 10mm radiator tails

It's a minefield. In fact the whole thing is a minefield. As I have said before I prefer using a correction factor, ie you down rate the rads outpu...

4 years ago
Reply
RE: What's your current daily damage?

As it happens, I have been a fairly close eye on things for the last week. First up, context. Three bed leaky old building in Southern England. Hour...

4 years ago
Reply
RE: ASHP Retrofit in a 2015 house with 10mm radiator tails

I wonder if this is something we don't give enough consideration to. I too have noticed my heating takes a very long time to reach temp, sometimes mea...

4 years ago
Reply
RE: ASHP Retrofit in a 2015 house with 10mm radiator tails

@alistairgbarron - I had similar painful hoops to jump through, and had the additional constraints caused by a small listed building, the listing limi...

4 years ago
Reply
RE: ASHP Retrofit in a 2015 house with 10mm radiator tails

I had a few installer quotes based on the MCS software. They didn't get the job. Good that you are double checking things, typos are easy to do.

4 years ago
Reply
RE: ASHP Retrofit in a 2015 house with 10mm radiator tails

@alistairgbarron - sorry, I see now that you are already well ahead of the game on the calculations. I also got a bit confused by the thread/post re-a...

4 years ago
Reply
RE: How many installers do you think have heat pumps at home?

Then the next even more interesting question might be: "Would you still have installed a heat pump if you hadn't been bribed sorry 'incentivised'?" Th...

4 years ago
Reply
RE: ASHP Retrofit in a 2015 house with 10mm radiator tails

Indeed. A good rule of thumb is a ASHP with a highish leaving water temperature (say 50 degrees, which means a delta t (difference or delta, between w...

4 years ago
Reply
RE: Measuring your COP

To which I might add, if you aim low enough, sooner or later you will shoot yourself in the foot. That is what sooner or later the industry will find ...

4 years ago
Reply
RE: Measuring your COP

@julianc - thanks. I agree, but perhaps more often than not, there isn't a real engineer directly involved. My system was in effect designed by ...

4 years ago
Reply
RE: Measuring your COP

That's not the same thing, as your comment makes clear: the 35, 40, 55 etc are arbitrary vaguely ordinal numbers (could just as easily be 3 4 and 5 or...

4 years ago
Reply
RE: Measuring your COP

Normally this forum is an excellent example of what a forum (forum: a place where people can exchange opinions and ideas on a particular issue) should...

4 years ago
Page 235 / 254
Share:

SPONSORS

Join Us!

Installer Finder

Degrees of Separation

Latest Posts

SPONSORS

Click to access the login or register cheese
Protected By
Shield Security PRO