Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 9, 2026
Here's the local Met Office weather station recorded outdoor temp vs byte_09 for the last 48 hours: I think that pretty much confirms byte_09 is t...
It does seems very possible it is an end of data indicator, given most of the message after it is made up of zeros, like this: "04010000272c00006911...
Well done! Virtual machines are not easy from what I gather, which echoes my own experience, things like network access via the host's hardware being ...
@derek-m - I've worked out a way of getting the data out of the log files, here's a snapshot (actual file will be csv): As you can see, most of th...
@murchison2003 - I don't doubt your observations on what you have spent at all, I am just trying to highlight the fact that it is often far from clear...
Yes, I have that booklet as well, the thing is the modbus mappings don't correspond with the midea_ac_lan mappings, as in they don't have the same add...
Again, the numbers (not you!) don't make sense. 3000 litres is very roughly 30,000 kWh. You say at the top of this page, you are currently using appro...
I do, but they either use different fuels (one still uses coal!) or heat their homes differently (different patterns and or warmth levels or main boil...
Notify1 (elif self._message_type == MessageType.notify1 and self._body_type == 0x04: at bottom of C3\message.py) was in the original code from git hub...
@bristoljoe - it is completely crazy, just doesn't make any sense. I have an old leaky high heat loss building, listed so not easy to improve this sid...
@derek-m - it's OK, I've already done them, I recall sometime in the past I missed something out in one of the other files, didn't crash the code, but...
@derek-m - thanks. I think the midea_devices.py and C3\device.py files will also need corresponding additions for the mods to work. Will add them and ...
- 27 Forums
- 2,762 Topics
- 65 K Posts
- 1,511 Online
- 7,168 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 3 hours ago
-
RE: Vaillant Aurotherm - Heater Wire Position
I have a recent Pro model. It has a condensate drain at...
By Batpred , 3 hours ago
-
RE: Adventures in heat loss calculations
At this point its probably worth pointing out, for futu...
By JamesPa , 5 hours ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 8 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 1 day ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 2 days ago
-
Thank you @trebor12345
By rgabor , 2 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 2 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 2 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 3 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 5 days ago


