Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 9, 2026
I agree for control purposes, but what if the app data is 'adjusted' before being sent? I do have a primary/secondary split system. and thought - i...
I very much agree! I haven't made any final decisions yet, so I do have options, but my goal is still to end up with a 'just deploy' solution. I am su...
I have heard that breaking changes are a real problem with HA (nuvver tuft of hair lands on the floor). My goal when starting out with this thread was...
@derek-m - sounds interesting! The current/target temperature changes continue to produce '0' (zero), which I guess is 'nothing' rather than the num...
@mjr - thanks for your welcome contribution. It's good that people know there are other options out there that might not involve so much Trichotilloma...
That's why I put that in, to warn people that, however good a head of hair people have when they start working on Home Assistant, within short order t...
Part 4: Getting Home Assistant up and running I had hoped this would be a quick and easy post, but the reality has been very different, so much ...
Have done so, but only for indoor/current_temperature, target_temperature causes a fatal error ("TypeError: Attempted to reuse key: 'target_temperatur...
They (the 03/01messages) are the ones that arrive every minute, so lots of them, but most of the values are static, and I think all the available byte...
@derek-m - they are text files, just open them in any text editor. If you use one of the better ones (I use Notepad++), it will do some basic code hig...
@kev-m - yes, a new thread does make sense. Something isn't right, and because I am me, I want an explanation! For now, I can confirm most of your ass...
SPONSORS
Degrees of Separation
Latest Posts
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 2 hours ago
-
RE: Vaillant Aurotherm - Heater Wire Position
I have a recent Pro model. It has a condensate drain at...
By Batpred , 3 hours ago
-
RE: Adventures in heat loss calculations
At this point its probably worth pointing out, for futu...
By JamesPa , 5 hours ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 8 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 1 day ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 2 days ago
-
Thank you @trebor12345
By rgabor , 2 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 2 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 2 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 3 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 5 days ago
SPONSORS
