Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 9, 2026
Thanks for the thanks. You might well be OK with 2GB of RAM, I monitor my system RAM usage an it is just under 1GB most of the time. The 4GB stipulati...
It's called masterly inactivity... I had had similar thoughts, thinking about recovering from an overnight setback, for example, when the deviati...
2002h yesterday evening: got a no response error. Gave up for the day... This morning I added a short sleep between the different instrument calls, ...
Righty-ho, I have started with what i hope is the simplest way of automating changes to the WCC based on the difference between the aIAT and dIAT. The...
Thanks, much appreciated. Naturally I am treading carefully, given I am new to controlling a heat pump using controls outside the heat pump controller...
I agree your code is simple compared to that used in industrial controllers, but I am am trying to set up the simplest code that can achieve my aims, ...
Perhaps I am already over-complicating things. I certainly don't want an uncontrolled positive feedback loop that melts down my heat pump... ...
Good point - that's why I posted the code before running it, greater minds than mine can see the cracks and flaws. Maybe the key thing here is the che...
Spotted some typos, hence the three edits for the OP. There may be others...
Those emoncms charts continue not to impress (at least for me). The colours are hard to distinguish (and I am not colour blind so far as I know) but e...
Part 2: Detailed Hardware Specification One of the problems that I had was that I was not familiar with the types of hardware I needed. I would know...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Adventures in heat loss calculations
A refinement of the degree-day method The degree day ...
By Rob of York , 25 minutes ago
-
Glowing feedback from one of the UK’s top installers ab...
By Mars , 29 minutes ago
-
Vaillant Aurotherm - Heater Wire Position
I wanted to check the actual position of the Heating Wi...
By trebor12345 , 43 minutes ago
-
RE: Tell us about your Solar (PV) setup
Our PV set-up has moved over time. Warning this is a sh...
By Judith , 19 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 1 day ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
I’m really liking reading through this thread and the r...
By Judith , 1 day ago
-
Thank you @trebor12345
By rgabor , 1 day ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 2 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 2 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 2 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 5 days ago
SPONSORS
