Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 26, 2026
Worth considering something like this? They are bi-directional of course. Two sources or two loads flexibility.. &nb...
That makes some sense. I found the Solis was quite open as a manufacturer. I hear some inverters (not sure if givenergy or synergy) leave it all loc...
It can be made to look as complex as we want! I believe the safest from a reg pov is to use scenario 2. Since your sunnyboy does not have a CT ...
I currently have this setup with the CT clamp/coil being connected "via" their (optional) meter to the inverter. It works without any dependency on th...
Thank you. It is clearly a problem I do not experience. Ukpn as dno granted the export limit in kw. I can set it on the inverter in kw. At the momen...
Great point, one of the key ones in my chat with Octopus following my ASHP enquiry before Christmas. Tariffs are a concern.
Definitely and professionals sometimes miss it. I had a similar situation when my EV charger was fit. It is not bi-directional ready, but I remember...
That´s an interesting point. The combi that we have is a condensing model. I assumed it would be getting in that mode most of the time... Anyway, w...
My memories do not go back to that 🙂 But at some point I may get a real fireplace, nothing beats that feeling. On the other side of the spe...
I am impressed with the depth of knowledge in this thread.. I was not sure what setback is, now I know we have ours at 15C! Given the cold weather,...
Perhaps the link only works when logged in.. I will include it again. The Solis S6 cert docs can be found on the Ena website, via this link connec...
@transparent Just to be clear, when you set an export limit on all the inverters you have, do you set it as a maximum in amps? If a lim...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist Have you ran the numbers as to which ...
By Papahuhu , 2 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 3 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 5 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 5 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 6 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 23 hours ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 23 hours ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 2 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago
SPONSORS
