Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jul 17, 2026
As the Iberian blackout reminded us, anything you don’t exercise now and then can show a habit of sulking when you really need it… 😄One small...
The diagram describes what happens inside the Solis. All these relays are electronically controlled by the firmware it runs. By bonding I understan...
Clearly, we have to be very careful with comparisons. It is up to each individual or company to decide on what they see as comparable. Having said ...
Solis confirmed that the S6 works with a single battery (pack) via CANbus. So the BMS connected via CANbus needs "to take care" of any communication r...
I am wondering if in any V2X, would the car battery ever send DC to the EV plug or always AC? And what happens when a V2X car is plugged into a rece...
Good point. To use that, you need some device that allows the power of the car HV DC battery to be fed to the home: a special adapter in the char...
This is what the Solis Engineers sent me about earthing, it does not mandate a rod in all situations, but it may apply: When no voltage is present...
I remember reading in some inverters. They mandate a separate earth arrangement for the inverter to work on UPS/backup/off-grid mode. It could be beca...
Yes, the one I use is 125Amps double pole. Top powers the inverter, middle=off, bottom=connect backup loads to grid I have not found a Geya consume...
We always had it, it is very useful. We had multiple changes made over the years and never had a visit from the DNO for it. 1) EV charger 2) new ki...
This probably makes it simpler to see... In James's case, perhaps the simplest is to make the existing consumer unit become the...
I think the assumption is that the inverter would be able to continue supplying power to the old consumer unit. In order to have a fully automatic sys...
- 26 Forums
- 2,716 Topics
- 63.6 K Posts
- 414 Online
- 7,116 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
-
RE: Indevolt Batteries UK Support & Info Thread
Yesterday the UK Government published its response to t...
By Transparent , 20 minutes ago
-
Sun getting through the windows: if you don't have sola...
By bobflux , 34 minutes ago
-
RE: Comms and power cabling to outside unit
@jamespa I can only guess the issue is with cost of ...
By Papahuhu , 2 hours ago
-
RE: Vaillant Arotherm Pro vs new Plus
when our system was installed in September 2 years ago ...
By Judith , 15 hours ago
-
RE: Rate the quality of your heat pump design and installation
I had a Heat Geek lead install by Green Heat Norfolk. T...
By Orlando , 23 hours ago
-
RE: Mitsubishi Ecodan FTC6 settings
While @F1p's dongles are great, the FTC can do this its...
By RobS , 2 days ago
-
RE: Samsung heat pump - data cable issue
If it's a data cable, current will be minuscule, voltag...
By bobflux , 2 days ago
-
RE: MCS Quality Audit – Has Anyone Had One? Did It Lead to Remediation?
I got hit with an RHI audit in 2022. It was far from c...
By Abernyte , 2 days ago
-
RE: Electricity price predictions
@papahuhu Groucho Marx had something to say about no...
By Toodles , 2 days ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@jamespa haha very true, although the engineer yesterda...
By swwils , 2 days ago
-
RE: What a difference a few degrees make.
Wow. Having accepted the challenge, I ran the cold tap ...
By Old_Scientist , 3 days ago
-
RE: HeatPump maintenance in Swindon area?
@vince31 have you tried using our finder:/p>
By Mars , 3 days ago
-
Looking for beta testers for a new homeowner heat pump tool
Over the past few months I've been building a brand new...
By Mars , 3 days ago



