Forums

Forums
Renewable Heating
Air Source Heat Pum...
Samsung E911 interm...
 
Notifications
Clear all

Samsung E911 intermittent issue

 
Page 6 / 10
Air Source Heat Pumps (ASHPs)
Last Post by NetDonkey 6 months ago
111 Posts
6 Users
25 Reactions
8,425 Views
RSS
 NetDonkey
(@netdonkey)
Estimable Member Member
Joined: 11 months ago
Posts: 56
Topic starter 12/12/2024 11:07 am  

Posted by: @transparent
↑

Unscrew the plastic cap on the top and press down the brass plunger.
You may get a mixture of air and water before you see just water trickling out.

I've just been unscrewing the little plastic cap and air was coming out. didnt realise it plunged!!!


   
👍
1
ReplyQuote
Transparent
 Transparent
(@transparent)
Illustrious Member Moderator
Joined: 4 years ago
Posts: 2438
12/12/2024 11:08 am  

Yes, I noted that your first post on this topic said

Posted by: @netdonkey
↑

I have a AE080CXYDEK which was installed back in June and has been working well.

But I'm unsure whether it was 'working well' because it was relatively easy to push through enough energy when the outside temperature was high.

I don't suppose you know what the flow-rate was in July, for example?

Save energy... recycle electrons!


   
ReplyQuote
 ASHP-BOBBA
(@ashp-bobba)
Reputable Member Member
Joined: 8 months ago
Posts: 198
12/12/2024 11:12 am  

@transparent also the circuit might work enough on DHW alone and was not set up for heating if this is the 1st winter?

Professional installer. Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.


   
ReplyQuote
 ASHP-BOBBA
(@ashp-bobba)
Reputable Member Member
Joined: 8 months ago
Posts: 198
12/12/2024 11:13 am  

@netdonkey is this system only 6 month old? 

If you you are well within your warranty and if it is not working they should attend and repair? I would just watch what they do to fix it and ask them to prove the flow rate.

Professional installer. Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.


   
👍
1
ReplyQuote
 NetDonkey
(@netdonkey)
Estimable Member Member
Joined: 11 months ago
Posts: 56
Topic starter 12/12/2024 11:21 am  

@transparent Sadly not


   
ReplyQuote
 ASHP-BOBBA
(@ashp-bobba)
Reputable Member Member
Joined: 8 months ago
Posts: 198
12/12/2024 11:34 am  

@netdonkey ah so it was working last winter then? 

 

 

Professional installer. Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.


   
ReplyQuote



 NetDonkey
(@netdonkey)
Estimable Member Member
Joined: 11 months ago
Posts: 56
Topic starter 12/12/2024 11:46 am  

@ashp-bobba Ahh no sorry, its the first winter.

 

So this pressure release valve, I unscrew the small cap and push down? 

IMG 4272 (1)

 


   
ReplyQuote
 NetDonkey
(@netdonkey)
Estimable Member Member
Joined: 11 months ago
Posts: 56
Topic starter 12/12/2024 11:53 am  

@ashp-bobba So there is the Evosta 3 and also a Grundfos UPM3 FLEX AS The Evosta3 is set to regulation mode 3 with constant curve

Screenshot 2024 12 12 at 10.39.19

  and the Grundfos looks to be level/mode 2.  The green light on the bottom give a flash every second which is apparently normal

IMG 4292

 


   
ReplyQuote
 ASHP-BOBBA
(@ashp-bobba)
Reputable Member Member
Joined: 8 months ago
Posts: 198
12/12/2024 12:02 pm  

@netdonkey No pushing down needed, just unscrew little red plug and leave it open for a bit, the valve will automatically let air out as it arrives, if there is no air coming out then there is no air and nothing will come out.

Just to clarify 2 messages back, (sadly not) is your ref to not under warranty? but you are also confirming this is the 1st winter heating for this system? 

Assuming this system is less than 2 years old - All ASHP if done under the grant scheme or compliant with MCS / APHC /NICEIC / NAPIT / BESCA must have 2 years warranty and be under an insurance and consumer code scheme like HIES, the installer / manufactures must support you reasonably.

If you are unlucky that the installer went bust HIES or equiv will employ another specialist to support you under the insurance you paid, even if you don't know you paid said insurance, you did as its part of the costs and the installer should have discussed and detailed this to you as part of your contract under the consumers code.

 

Professional installer. Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.


   
ReplyQuote
 NetDonkey
(@netdonkey)
Estimable Member Member
Joined: 11 months ago
Posts: 56
Topic starter 12/12/2024 12:22 pm  

@ashp-bobba So it was installed 6 months ago should still be covered but the installer was a solar guy who subbed the work out.  The initial design was done and certified using Daikin but he changed his mind and said he got a good deal on the Samsung


   
ReplyQuote
Transparent
 Transparent
(@transparent)
Illustrious Member Moderator
Joined: 4 years ago
Posts: 2438
12/12/2024 12:25 pm  

Whether you decide to manually release air from an 'automatic' valve rather depends on how much air is in the system, and what amount of exercise you want by revisiting valves in the attic.

Califfi is one of the better manufacturers.
This diagram of theirs shows the space taken up by the float within the casing.
It comes from their web page which discusses the risks of doing a manual air release.

image

Save energy... recycle electrons!


   
ReplyQuote
 ASHP-BOBBA
(@ashp-bobba)
Reputable Member Member
Joined: 8 months ago
Posts: 198
12/12/2024 1:10 pm  

@netdonkey Is the grundfos the higher pump or the lower pump near the floor? 

 

Professional installer. Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.


   
ReplyQuote



Page 6 / 10
Forum Jump:
  Previous Topic
Next Topic  
Related Topics
Topic Tags:  samsung (7) ,
Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts

Members Online