@derek-m 😆 😆 the heatmisers controls the UFH. One zone is controlled by the wifi thermostat , which controls the living room and hallway, the other one which is a manual one controls the kitchen.
the other controls (760) does the dhw and ufh and towel rails upstairs.
no the installers didn't say how they interacted with each other.
thanks
Hi Everyone,
I have noticed today, that although the ambient air temperature is a little warmer, our energy consumption has actually increased slightly. I think that in our case it is because it is quite windy at the moment, and hence cold air is finding its way through any nooks and crannies.
Has anyone noticed a similar effect?
I have a weather station here too and there is indeed a strong positive correlation between both wind speed and rain fall amounts to increased power usage by the ASHP, we have a 2001 house that I would say is draught free and well insulated too, its simply the cooling effect of wind especially on wet masonry
Posted by: @witchcraftI have a weather station here too and there is indeed a strong positive correlation between both wind speed and rain fall amounts to increased power usage by the ASHP, we have a 2001 house that I would say is draught free and well insulated too, its simply the cooling effect of wind especially on wet masonry
Thanks Witchcraft,
Did you notice any correlation with wind direction?
Actually, now you mention it, yes. I didn't change anything from yesterday and the house was 21.5C yesterday evening. I thoight about moving the curve down but didn't. Rads were 35 or so as I remember checking them. It's now about 20C now and rads are still 35C. So my very unscientific conclusion is that I could be losing 1C or so because of the 30mph winds and rain.
I feel a log fire coming on this evening ... 🙂
Hi Everyone,
If there is anyone on the forum that I have upset or annoyed, by my what would seem to be inquisitive questioning, then please accept my unreserved apology. It is not that I am an active busybody, but rather an Engineer, who prefers to deal with hard facts and information, rather than having to make assumptions. It is only by knowing the full details will it be possible for me to offer the most appropriate help and advice.
Forum users should remember that -
a) I was not involved in the design of their system
b) I was not involved in the installation and commissioning of their system.
c) I do not have details of their home and lifestyle.
d) I do not know what equipment has been installed and how it has been configured.
It is only by getting answers to at least some of the above will it be possible to offer the correct help and advice.
-
Have Consumers Been Lied to About the Efficiency of Heat Pumps Made in China?
2 months ago
-
Ecodan consuming 100kwh per day in new build!!!
2 months ago
-
Help with understanding my Mitsubishi Ecodan air source heat pump
5 months ago
-
Efficiency Concerns on newly installed Mitsubishi Ecodan 8.5kW
5 months ago
-
Running my new Nibe ASHP efficiently
8 months ago
Currently viewing this topic 1 guest.
- 26 Forums
- 2,177 Topics
- 47.9 K Posts
- 9 Online
- 5,748 Members
Podcast Picks
Latest Posts
-
RE: Testing new controls/monitoring for Midea Clone ASHP
If it helps, my outlet is running at 25C. It would seem...
By Papahuhu , 2 hours ago
-
@drei Id be wary of the reference in quote 1 to reattac...
By benson , 8 hours ago
-
RE: Renewable Heating Hub WhatsApp Channel
I clicked on the link and have WhatsApp on the computer...
By dgclimatecontrol , 9 hours ago
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
@editor yeah i looked at those but id need 12+ for my p...
By AdamK , 9 hours ago
-
RE: Say hello and introduce yourself
Thanks for the warm welcome @editor and can't wait to b...
By Pirate Rich , 11 hours ago
-
RE: Powerwall 3 or Myenergi or something else?
Let's also bear in mind that Fogstar supply more than o...
By Majordennisbloodnok , 14 hours ago
-
RE: How to choose Towel Rails for an ASHP
@judith Yes I agree. They are extremely expensive. ...
By GrahamF , 18 hours ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@downfield I have never added a buffer sensor as we nev...
By ASHP-BOBBA , 18 hours ago
-
Riello NXHM Monobloc Air Source Heat Pump
Hi, does anyone have any feedback on Riello NXHM Monobl...
By dgarvey , 1 day ago
-
-
RE: How to Zone with a Single Room with UFH
We have exactly what you describe, one utility room wit...
By Judith , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@agentgeorge Come the Ist of October, the Cosy cheapest...
By Toodles , 2 days ago
-
RE: Boxt Heat Pump Installation Experience
@ashfp Mine does have a buffer tank. That was my experi...
By Andrew J H , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 3 days ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 3 days ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 4 days ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 4 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 4 days ago