Forums

Forums
Renewable Heating
Air Source Heat Pum...
Fine tuning your AS...
 
Notifications
Clear all

Fine tuning your ASHP performance

 
Page 13 / 17
Air Source Heat Pumps (ASHPs)
Last Post by MarkC 3 years ago
195 Posts
15 Users
76 Reactions
48.3 K Views
RSS
 Nigel42
(@nigel42)
Trusted Member Member
Joined: 4 years ago
Posts: 32
06/12/2021 9:51 pm  

@derek-m 😆 😆 the heatmisers controls the UFH. One zone is controlled by the wifi thermostat , which controls the living room and hallway, the other one which is a manual one controls the kitchen.

the other controls (760) does the dhw and ufh and towel rails upstairs.

 

no the installers didn't say how they interacted with each other.

 

thanks


   
ReplyQuote
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
06/12/2021 10:45 pm  

@nigel42 

What do you mean by 760, please be more specific.


   
ReplyQuote
 Nigel42
(@nigel42)
Trusted Member Member
Joined: 4 years ago
Posts: 32
07/12/2021 9:49 am  

@derek-m sorry  the 760 is the model number of the control panel in the hallway. this one. 

CD9C24DF 2514 4E0C B4C6 2842C7ED0A82

 


   
ReplyQuote



 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
07/12/2021 1:32 pm  

@nigel42 

Hi Nigel,

Why is the '760' showing 'blue screen'?


   
ReplyQuote
 Colin
(@colin)
Estimable Member Member
Joined: 4 years ago
Posts: 56
07/12/2021 2:35 pm  

@nigel42 Looks like the VRC 700 or a variant of it to me https://www.vaillant.co.uk/homeowners/products/vaillant-vrc-700-heating-control-29380.html

 


   
ReplyQuote
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
07/12/2021 3:08 pm  

Hi Everyone,

I have noticed today, that although the ambient air temperature is a little warmer, our energy consumption has actually increased slightly. I think that in our case it is because it is quite windy at the moment, and hence cold air is finding its way through any nooks and crannies.

Has anyone noticed a similar effect?


   
👍
1
ReplyQuote
 Kev M
(@kev-m)
Famed Member Member
Joined: 4 years ago
Posts: 1276
07/12/2021 3:24 pm  

@derek-m 

definitely.  Add in a bit of wind-chill too.  Rain doesn't help either.


   
ReplyQuote
 witchcraft
(@witchcraft)
Reputable Member Contributor
Joined: 4 years ago
Posts: 91
07/12/2021 3:53 pm  

I have a weather station here too and there is indeed a strong positive correlation between both wind speed and rain fall amounts to increased power usage by the ASHP, we have a 2001 house that I would say is draught free and well insulated too, its simply the cooling effect of wind especially on wet masonry

 

This post was modified 4 years ago by witchcraft

   
ReplyQuote
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
07/12/2021 5:02 pm  
Posted by: @kev-m

@derek-m 

definitely.  Add in a bit of wind-chill too.  Rain doesn't help either.

Hi Kev,

As your system is on weather compensation, did you notice any variation in indoor temperatures due to these affects?


   
ReplyQuote



 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
07/12/2021 5:05 pm  
Posted by: @witchcraft

I have a weather station here too and there is indeed a strong positive correlation between both wind speed and rain fall amounts to increased power usage by the ASHP, we have a 2001 house that I would say is draught free and well insulated too, its simply the cooling effect of wind especially on wet masonry

 

Thanks Witchcraft,

Did you notice any correlation with wind direction?


   
ReplyQuote
 Kev M
(@kev-m)
Famed Member Member
Joined: 4 years ago
Posts: 1276
07/12/2021 5:21 pm  

@derek-m 

Actually, now you mention it, yes. I didn't change anything from yesterday and the house was 21.5C yesterday evening.  I thoight about moving the curve down but didn't.  Rads were 35 or so as I remember checking them. It's now about 20C now and rads are still 35C.  So my very unscientific conclusion is that I could be losing 1C or so because of the 30mph winds and rain.

I feel a log fire coming on this evening ... 🙂 


   
ReplyQuote
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
07/12/2021 5:31 pm  

Hi Everyone,

If there is anyone on the forum that I have upset or annoyed, by my what would seem to be inquisitive questioning, then please accept my unreserved apology. It is not that I am an active busybody, but rather an Engineer, who prefers to deal with hard facts and information, rather than having to make assumptions. It is only by knowing the full details will it be possible for me to offer the most appropriate help and advice.

Forum users should remember that -

a) I was not involved in the design of their system

b) I was not involved in the installation and commissioning of their system.

c) I do not have details of their home and lifestyle.

d) I do not know what equipment has been installed and how it has been configured.

It is only by getting answers to at least some of the above will it be possible to offer the correct help and advice. 


   
ReplyQuote
Page 13 / 17
Forum Jump:
  Previous Topic
Next Topic  
Related Topics
Topic Tags:  efficiency (13) , SCOP (2) , performance (2) ,
Share:

Join Us!

Podcast Picks

Latest Posts