| Posts with their shortened content | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By Batpred, 24 hours ago
Forum
Energy Storage
|
|
| The diagram below is a simplified view of the internals of the Solis S6 hybrid. The earth shows against the grid port connects to the consumer unit and the DNO (in my case). There is also an additio... | ||
|
|
RE: Heat pump not reaching flow temperature
By JamesPa, 24 hours ago |
|
| @davec Ive had a look at the screenshots. Lots of the parameters are things you wouldn't want to touch but: Im guessing H43 and H44 are the two FTs for the WC curve and P18 and P19 the corresponding ... | ||
|
|
RE: Vaillant aroTherm not heating with many faults
By JamesPa, 1 day ago |
|
| When I had a series of apparently unrelated faults my installer turned up, checked the flow rate using the test menu, and cleaned the filters (two - a mag filter and a gauze filter immediately behind ... | ||
|
|
RE: Heat pump not reaching flow temperature
By JamesPa, 1 day ago |
|
| At this stage I would say no as gross underestimation of the loss is not the most likely cause of the problem. More likely causes are (a) the heat pump, though badged 11kW, doesnt actually do 11kW at ... | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By JamesPa, 1 day ago
Forum
Energy Storage
|
|
| I cant see how that is the case if the earth is provided by means of a bond to the metal outer sheath of the incomer; no cut (other than one in your driveway of which you would surely be aware) can re... | ||
|
|
RE: Heat pump not reaching flow temperature
By DaveC, 1 day ago |
|
| Thanks @jamespa and thanks @johnd (hope I haven’t hijacked your thread too much). I’ll hopefully hear back from our installer or the manufacturer early next week and will post if there’s anything usef... | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By Transparent, 1 day ago
Forum
Energy Storage
|
|
| I too think that the Solis earthing diagram is confusing. As I see it the situation is this... We commonly have circuits which are protected by an Earth-Leakage Trip, such as an RCD or RCBO.They 'meas... | ||
|
|
Vaillant aroTherm not heating with many faults
By Anon67, 1 day ago |
|
| I have a 3 year old 10kW vaillant aroTherm heat pump connected to dhw and ufh. The heat pump kicks in on demand for hot water but when it comes to heating it faults, getting a mixture of faults F.732... | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By JamesPa, 1 day ago
Forum
Energy Storage
|
|
| Thanks for the clarification. | ||
|
|
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
By JamesPa, 1 day ago |
|
| OK, TBH I dont know enough about MLCP to comment with any authority. The simple message so far as I am aware is: Nothing inherently wrong with plastic pipe but it has a smaller internal diameter and ... | ||
|
|
RE: Predicted Heat Loss from MCS calcs vs EPC vs actual
By Tim441, 1 day ago |
|
| My gut feeling is that the heat pump is right sized. it does not seem to cycle It heats the house comfortably costs/usage seems reasonable - especially against predictions by EPC or MCS the spare cap... | ||
|
|
Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual
By Tim441, 1 day ago |
|
| LG therma V installed 2020. 16kw monobloc. Initially on fixed flows then weather compensation Looking back at the info from design in 2020 EPC 2020 predictedThe annual Space Heating requirement for y... | ||
- 26 Forums
- 2,406 Topics
- 54.6 K Posts
- 293 Online
- 6,092 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Vaillant aroTherm not heating with many faults
@editor hmmm, our engineers Rae, Craig, Naz, Rob and Ry...
By ASHP-BOBBA , 11 minutes ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
@editor Hi Mars. I totally agree with your comments. ...
By Richard24738 , 14 minutes ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
Indeed! And my apologies, I should have expected you...
By Batpred , 31 minutes ago
-
RE: I’m glad the cold spell is over!
@editor as a reply for this date the 6th of Jan in o...
By Nursethescreens , 2 hours ago
-
RE: Experience - New Build / Complete New Heating System
@bash you and me both, can agree. Nothing like shooti...
By vincro , 2 hours ago
-
RE: Heat loss based on gas usage
@jamespa Thanks. The numbers posted above were jus...
By Bash , 2 hours ago
-
RE: Heat pump not reaching flow temperature
I would describe this as either a fault or a configurat...
By JamesPa , 3 hours ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
@batpred I started reading this thread thinking I would...
By Hook , 4 hours ago
-
RE: Please help with the settings ecodan
@sheriff-fatman when I increase it to number 3, the ...
By nose1972 , 4 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
I forgot to mention: Octopus measured our heat loss at ...
By Toodles , 6 hours ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
Thanks Mars and thank you for reaching out to so many p...
By iotum , 6 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: @davec Manufacturer: Peak Energy Mode...
By DaveC , 6 hours ago
-
RE: Rate the quality of your heat pump design and installation
Well, the guy came out, turned the heat pump to max, we...
By razz , 6 hours ago
-
Midea R32 setup and bizarre running with lengthy off periods?
Hi I am new to the world of ASHP and have just had a re...
By Countryman Helmsley , 7 hours ago
-
RE: Setback savings - fact or fiction?
Given the weather has been relatively stable, the empir...
By Batpred , 7 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor That is very kind! Thank you so much.
By johnbroome , 8 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@wally Hi I am not sure how large your house is b...
By TechnoGeek , 9 hours ago
-
RE: Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual
I've been thinking along similar lines to @tim441 from ...
By Sheriff Fatman , 9 hours ago
-
Thanks, @technogeek. Good to hear about the accuracy. ...
By Majordennisbloodnok , 10 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In my case it was a very specific pattern of behaviour ...
By Sheriff Fatman , 10 hours ago


