Recent Posts

| Forums | Topics

Page 121 / 172 Prev Next

Posts with their shortened content
	RE: 5 Star Service from Havenwise By benson, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@hcas majordennis is on the money for me in terms of what I'd expect to see when you are making claims of savings of 40, 50% etc. Would be much clearer and the last thing customers need in this indust...
	RE: How good is the app support for your heat pump? By Richard24738, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@majordennisbloodnok Thanks. Not sure what your security concern is. I only use it for reporting and do not use any of the facilities to manage my pump. I do not want any reliance on the internet to c...
	RE: How good is the app support for your heat pump? By Majordennisbloodnok, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	You've mentioned that before, @richard24738, and it does look good. However, I do have a security concern about it that would make me rather cautious.
	RE: How good is the app support for your heat pump? By Morgan, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@richard24738 thank you, I shall a look. Not heard of it until now.
	RE: New Fogstar 15.5kWh upright solution By Transparent, 3 weeks ago Forum Energy Storage
	Have you tried going to Fogstar's website and looking for downloads? It took me about 10secs to find the instructions there! 🤔
	RE: How good is the app support for your heat pump? By Richard24738, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@morgan Not sure if you have done so but, if not, have a look at the Mel Pump app for Mitsubishi. It is chargeable but so much better than Mel-Cloud.
	RE: Midea ASHP – how to set weather compensation By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	It depends on what the actual heat loss is, what the changes are and how disruptive they are. If the actual heat loss turns out to be 10kW (ie at the bottom end of the range estimated based on your o...
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Four questions: (1) what format is the data in? Hopefully csv or something that can be converted to csv? (2) how frequent are the logged data points in each of the data sets (IAT OAT and energy in)? (...
	RE: How good is the app support for your heat pump? By Sheriff Fatman, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I'm using Havenwise with an Ecodan system. I'm happy with it as a means to run the heating, but the reporting within the Havenwise app is currently very limited. It provides a rolling 7 day snapshot...
	RE: Midea ASHP – how to set weather compensation By pash44pump, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@cathoderay and @jamespa - thanks for your replies. Unfortunately I don't have the last 4 years data. I bought the dataloggers at @cathoderay's recommendation and I therefore have the last 2 months of...
	RE: New Fogstar 15.5kWh upright solution By Batpred, 3 weeks ago Forum Energy Storage
	Oh, and still no answer on how to upgrade the SEPLOS BMS firmware...
	RE: New Fogstar 15.5kWh upright solution By Batpred, 3 weeks ago Forum Energy Storage
	So following on the AC connections of the inverter ( on the topic Isolating the System for a Planned Power Cut.). Repeating my last post on it below. When I spoke to a Solis engineer, I got the sens...