Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Octopus (the grid) is my battery
@andris And that of course is just as it should be!😉 I feel hard done by if I have to pay as much or more than the export rate of 15pence per kWh! The differential at present is not worth charging up the battery so as to export energy during times of peak demand at the moment - allowing for the 10 % round trip loss, anything over about 13.5 pence means I leave the grid power alone. 😉 Today’s solar is dropping rapidly now (19:00) but our system has produced 40 kWh and of that, 31.5 kWh have been exported. Regards, Toodles.
Toodles, heats his home with cold draughts and cooks food with magnets.
@toodles That's great!
Only at 32.5kw but it was pretty cloudy all day the in Edinburgh.
Have nice evening 😊
Ps: This year's record so far 54.5kw on 26th of April.
16kw Samsung TDM ASHP. 8.4kw PV, power optimizers 20×420watt panels 6kw SolarEdge inverter.
@andris My ‘Best Effort’ so far was on 4th. June 2023 when the production was 51.5 kWh. I have 8.1 kWp across a total of 21 Canadian Solar panels, each with an Enphase IQ7 microconverter. I do have some shadowing, and placement is not ideal but the best achievable in the circumstances. Regards a very green Toodles in Berkshire.
Toodles, heats his home with cold draughts and cooks food with magnets.
- 27 Forums
- 2,758 Topics
- 64.9 K Posts
- 1,723 Online
- 7,162 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay I started to record oil usage per month on ...
By ian33a , 1 hour ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 5 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 10 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago





