Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 8, 2026
In most cases I'd expect such liability would be tested under civil law. But the boundaries of criminal liability aren't particularly clear when it ...
This discussion has gone quite deep for our Hello & Welcome topic. If you're new here, and still wondering whether to introduce yourself, then p...
... or when you attempt make a claim on insurance !
I should've read further before posting the above. What we learn from this is that SunSynk believe that their inverter should send commands to dir...
@ggw I'm reading the Sunsynk ECCO manual and I've found some relevant information about low-battery settings: That's a pretty strong indi...
Let's first note what those parameters are. They are defined by Sect.27 of the Electricity Regulations 2002. Historically DNOs have maintained t...
The same as what? Do you mean that it continuously varies according to demand by houses connected to that local substation?Because that's what you'd...
That's odd. I can't see anything in the Sunsynk manual which suggest that to be the case.The inverter can detect there's a battery connected without...
Well the BMS on its own can't initiate a Charge from Grid.It requires the Sunsynk inverter to handle the matter. What happens if you simply disconne...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Tell us about your Solar (PV) setup
Our PV set-up has moved over time. Warning this is a sh...
By Judith , 1 hour ago
-
RE: Adventures in heat loss calculations
Agree with the first paragraph (I said roughly the same...
By JamesPa , 3 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 9 hours ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 11 hours ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 12 hours ago
-
Thank you @trebor12345
By rgabor , 14 hours ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 1 day ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 1 day ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 1 day ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 2 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 4 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 4 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting š
By tomasmcguinness , 4 days ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 4 days ago
SPONSORS
