Search with Wattson
Activity
 
Notifications
Clear all

Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!

Transparent
Transparent
@transparent
Moderator
Illustrious Member
Joined: Jan 20, 2022
Last seen: Oct 22, 2026
Topics: 16 / Replies: 3421
Reply
RE: Double heat pump for DHW?

Thanks Bob. Could you just clarify what you mean by setting "the ASHP power at 12kW"? Yes, I appreciate that 12kW may well be the largest you'd su...

2 years ago
Reply
RE: Heat pump quotes: Advice needed

One other point about microbore, or any system where the pipework isn't adequately sized for the required transfer of heat... To obtain the desired ...

2 years ago
Reply
RE: Heat pump quotes: Advice needed

It might be 'standard' in that it complies with the way MCS-approved installers are required to undertake calculations... 😥 ... but the lower ...

2 years ago
Reply
RE: Ecodan Legionella cycle - immersion heater problem

OK @clockworks - I agree with your analysis. So what you're seeing here is due to the relatively slow rate at which heat is rising in the tank. ...

2 years ago
Reply
RE: Ecodan Legionella cycle - immersion heater problem

I've just superimposed those and adjusted the x-axis to make the time-frames coincide... I think Mitsubishi need to justify the need to send the i...

2 years ago
Reply
RE: Double heat pump for DHW?

Thanks Bob. For such an elderly plate heat exchanger, yours is in a cupboard which is remarkably free of cobwebs! So that others can see what we'r...

2 years ago
Reply
RE: Double heat pump for DHW?

Can we have a photo of that plate heat exchanger please @bobtskutter ? Plus your comments on why this is preferable to having a coil inside the cyli...

2 years ago
Reply
RE: Ecodan Legionella cycle - immersion heater problem

You are making all the 'right' points @clockworks ... which gives me a dilemma because I'm meant to be installing an internal-insulation wall this aft...

2 years ago
Reply
RE: Ecodan Legionella cycle - immersion heater problem

There are randomised delays available... but they're not properly implemented,and sometimes not at all. All Smart Meters have a randomised offset to...

2 years ago
Reply
RE: Ecodan Legionella cycle - immersion heater problem

I'll raise that with the DESNZ committee who are creating the 'Standard' for Demand Side Response de-coupling of heat-pumps from the grid. There are...

2 years ago
Reply
RE: Ecidan Legionella cycle - immersion heater problem

Yes. You've got it. And you should definitely throw the problem back at the installers.You musn't have the thermostat in the immersion heater and th...

2 years ago
Page 113 / 287
Share:

SPONSORS

Join Us!

Installer Finder

Degrees of Separation

Latest Posts

SPONSORS

Click to access the login or register cheese
Protected By
Shield Security PRO