Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 1, 2026
Indeed!This general lack of energy knowledge within the wider UK population has been of concern to Ofgem, the energy-industry regulator.We are being h...
Do you know what the issue is? There might be sufficient expertise here to suggest a solution which could last you a few months until a HP Installer...
How much research have you done into this? The large V2G trial undertaken by OVO/Kaluza 5 years ago could only be offered to drivers with a Nissan L...
That's a tricky issue, and one which I expect to see being raised many times this year (2025) as consumers begin to realise what GivEnergy's strategy ...
It certainly would @ianmk13There would appear to be an excess of phases to the tune of +1 🤗 Contrary to what we in UK might imagine, 3-...
Yes. DNOs are very keen to upgrade domestic properties to 3-phase. The swapping of the Smart Meter to a 3-phase device is also free, and gets done b...
As this topic is being read by an OP who is still evaluating quotes for an ASHP,I'd like to add a comment about Vaillant. I've noticed that they hav...
Thanks Bob. Could you just clarify what you mean by setting "the ASHP power at 12kW"? Yes, I appreciate that 12kW may well be the largest you'd su...
One other point about microbore, or any system where the pipework isn't adequately sized for the required transfer of heat... To obtain the desired ...
It might be 'standard' in that it complies with the way MCS-approved installers are required to undertake calculations... 😥 ... but the lower ...
OK @clockworks - I agree with your analysis. So what you're seeing here is due to the relatively slow rate at which heat is rising in the tank. ...
I've just superimposed those and adjusted the x-axis to make the time-frames coincide... I think Mitsubishi need to justify the need to send the i...
- 26 Forums
- 2,730 Topics
- 64.1 K Posts
- 1,872 Online
- 7,133 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Digest of UK Energy Statistics
That sounds painful. It would be much better to charg...
By Transparent , 1 hour ago
-
Hole diameter is small but hole length is also very sma...
By bobflux , 3 hours ago
-
RE: Are Wind Turbines Really “Losers”?
We were sailing near a wind farm in the North Sea last ...
By Jeff , 3 hours ago
-
RE: Love veg, hate watering cans
For the last few months we've taken the simple measure ...
By Temperature_Gradient , 3 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist Being of a cautious nature, I tend to ag...
By Toodles , 4 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@papahuhu I think that accessibility issues go in waves...
By Toodles , 6 hours ago
-
@trebor12345 The idea is to ensure that Powerwall knows...
By Toodles , 6 hours ago
-
RE: Aircon - in listed buildings
We took a different approach. All our heating and cooli...
By EtchedPixels , 8 hours ago
-
RE: Indevolt Batteries UK Support & Info Thread
'hard limited' could be in 'admin' password protected s...
By JamesPa , 1 day ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Thanks. I do both, depending on purpose. For a quick po...
By cathodeRay , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
@batpred That makes sense! Thanks for the information.
By sttpd1917 , 1 day ago
-
And we're back to @editor's point about supplier depend...
By Majordennisbloodnok , 2 days ago
-
RE: Cleaning solar panels with a hosepipe
This is one reason I'd never make a good solicitor. I'm...
By Majordennisbloodnok , 2 days ago



