Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 5, 2026
for good order... here is the official advice from Solaredge on the ethernet connection:==================== Our advice will be to perform a power-c...
@derek-m thanks for that. No, I had not seen it before. Looks like that will help guide me on things to check. As I previously had no monitoring set...
Reading some of the above ....a small reminder that the batteries can only charge/discharge at a maximum rate. It may need to be a factor in the desig...
I should mention one of the difficulties I had was the way the app updates with inverter & optmiser information every 15 minutes. Afaik I could n...
@derek-m 🤣 🤣 too late!! I should have... especially I a couple of g&t in.... Sadly not fully conclusive. Not sure if it was me... g&t...or w...
@derek-m brilliant!! Simple is always best!! I'm going up now!!!
Just noting output so far today. When setting up Solaredge monitoring I added all the working optimisers - but have not yet done a physical check of t...
DNO has given permission for 5.5kwh max export - which I don't think we would exceed very often anyway due to non-optimal angle and orientation. Not...
@transparent really helpful thoughts - thanks! Very happy to have got monitoring working. I'm guessing the power down/up helped "kick" it into acti...
well... Day 1 after cleaning did not show any noticeable improvement! But of course hard to make exact comparisons without being certain of brightness...
Tried turning off DC, inverter, AC for 15 mins as suggested:www.partsxp.com www.partsxp.comRebooted RouterTurned back on AC, Inverter, DC.....Result.....
- 27 Forums
- 2,750 Topics
- 64.7 K Posts
- 273 Online
- 7,158 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 2 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
Sooooo, what did we do in the end? We approached three ...
By Penval , 2 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 7 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 9 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 9 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 10 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 1 day ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 1 day ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 2 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago



