Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jul 11, 2026
various updates: Solaredge pushed an inverter firmware update. Resulting in LAN connection now being seen including pings11111111I'm not sure if t...
for good order... here is the official advice from Solaredge on the ethernet connection:==================== Our advice will be to perform a power-c...
@derek-m thanks for that. No, I had not seen it before. Looks like that will help guide me on things to check. As I previously had no monitoring set...
Reading some of the above ....a small reminder that the batteries can only charge/discharge at a maximum rate. It may need to be a factor in the desig...
I should mention one of the difficulties I had was the way the app updates with inverter & optmiser information every 15 minutes. Afaik I could n...
@derek-m 🤣 🤣 too late!! I should have... especially I a couple of g&t in.... Sadly not fully conclusive. Not sure if it was me... g&t...or w...
@derek-m brilliant!! Simple is always best!! I'm going up now!!!
Just noting output so far today. When setting up Solaredge monitoring I added all the working optimisers - but have not yet done a physical check of t...
DNO has given permission for 5.5kwh max export - which I don't think we would exceed very often anyway due to non-optimal angle and orientation. Not...
@transparent really helpful thoughts - thanks! Very happy to have got monitoring working. I'm guessing the power down/up helped "kick" it into acti...
well... Day 1 after cleaning did not show any noticeable improvement! But of course hard to make exact comparisons without being certain of brightness...
SPONSORS
Degrees of Separation
Latest Posts
-
From what I can gather, Freedom has not gone into admin...
By Mars , 2 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
A good analysis with which I agree
By JamesPa , 6 hours ago
-
RE: Jokes and fun posts about heat pumps and renewables
@majordennisbloodnok Well, I can use such terms as HMRC...
By Toodles , 7 hours ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
I'd picked up that there was a leak coming from around ...
By Sheriff Fatman , 11 hours ago
-
RE: Who's your electricity provider and what's your tariff?
Great info. Thank you. Regards Pete
By peterackstraw , 11 hours ago
-
-
@trebor12345 Try opening the settings window and then ‘...
By Toodles , 16 hours ago
-
RE: Microgeneration Certification Scheme (MCS)
@jamespa A cynical view but, I fear that it is a fair ...
By Toodles , 1 day ago
-
RE: Indevolt Batteries UK Support & Info Thread
After a short while that was followed by the 'power war...
By JamesPa , 3 days ago
-
RE: Samsung heat pump - data cable issue
That's well done. Cable is the correct type (LIYCY = 2x...
By bobflux , 4 days ago
-
RE: Electricity price predictions
I agree, we will find out at the next budget whether th...
By Old_Scientist , 4 days ago
-
RE: Missing flow temperature in Heat Geek proposal
@editor I went through HG website, so should be ok for ...
By sttpd1917 , 4 days ago
-
RE: Air to air bus grant installer anywhere
The through wall two hole ones have their place (listed...
By EtchedPixels , 4 days ago
-
I hope it goes ok, Hon can be hard to set up IF the sof...
By Graham Hendra , 4 days ago
-
@clockworks Hi, So there is a big difference between st...
By ASHP-BOBBA , 4 days ago
SPONSORS
