Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 13, 2026
It would be interesting to know if the ECO mode also prevents the immersion heater from being activated? It would appear that when the DHW target te...
Hi TRBob, I’ve been fine tuning our WCcurve and it’s quite effective. and as Kev M suggested above in he’s reply you need to prevent room stats fro...
Oops just noticed if you’ve moved the thermistor to the bottom location of the cylinder it will send the wrong message to the HP controller. In ...
Hi… starting from the premise that all components are working and that your installer has set the UFHeating to an efficient (low flow temp) then I’m i...
Just wondered -can you lower the temperature when your hot water reheat starts? You seem to only have a 5 deg drop. That also means the start of the r...
@grnmeira “The cylinder seems to hold the temperature quite well. The problem happens when the system is totally idle, no demand for space heating, ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Missing flow temperature in Heat Geek proposal
Quite probably, does the guarantee come with any defini...
By JamesPa , 3 hours ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Good but - with your recirculating pump a high proporti...
By JamesPa , 6 hours ago
-
RE: Being screwed over by Volkswagen Audi Group
No worries, I can't really argue with your logic and I ...
By Old_Scientist , 9 hours ago
-
RE: 7kW EV Charger Options Advice
Thank you Rusty, all of those subtleties were lost on m...
By Judith , 14 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Flow rate is set by pressure created by the circulator ...
By bobflux , 1 day ago
-
RE: Glass lined Cylinder for private water supply
I have one of those... a Thermal Store. In my case th...
By Transparent , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 2 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 3 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@kilgorexv definitely a larger inverter will help and m...
By AndrewJ , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 4 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
The installation is almost done! I've written up two ...
By tomasmcguinness , 5 days ago
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 5 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 5 days ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 5 days ago
SPONSORS
