Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Mar 21, 2026
Ok it’s not too surprising you’ve got a DT of 1/2c if your flow rate is in the 20s can you take a picture of the pumps? As an alternative perhaps you ...
ok, but as you can already do the 540 enquiry means you are making really good progress. Data - You’ve already been Data Gathering- on the menu scre...
would be good to do a 540 enquiry to get your flow rate reading then get your flow and return thermistor readings while the HP is operating. then fa...
@morgan yes it looks like the controller is functioning properly. It also looks like @mjr has identified what’s wrong he’s just posted you a question...
Yes, I’m finding out AA does seem to be quite aggressive even though it’s set to normal. Perhaps the developers could have considered an eco setting o...
@kev-m thanks for your obvservatiins kev. Regarding the 2 step temp change…yes that was my thinking - to keep the target temperature east to reach on ...
This sounds like something we had... Need to check a few things to be sure... I will send you 2 pictures. One will be the first screen on the main ...
Real life data on a 16c setback from 9pm to 7am whereupon it was adjusted to 17.5c Here are 2 MELcloud pictures of our 8.5 Ecodan performance over a...
g Hi @kev-m i like your reporting presentation. What software are you using? How was it to set up?
@davew Ive just generated my first picture yay.
I’m sure MELCloud works it out once you’re familiar with it. The quickest way I’ve been using is off the FTC main screen. Press the right me...
Think I’ll claim the no pump in the heat pump thingy 😉😂😂 Davew have you tried a DT check while your system is in DHW mode? That will be a shorter re...
Latest Posts
-
RE: Advice on Vaillant Sensocomfort
@jamespa Thanks, that’s useful. It also seems the ...
By Batpred , 4 hours ago
-
RE: Debugging my legionella immersion heater
I notice this (66 is rather hot) with my legionella cyc...
By JamesPa , 10 hours ago
-
RE: DIY Heat Pump Installations: Navigating Legal and Regulatory Hurdles
@transparent I thought you would spot that wind turbine...
By Batpred , 10 hours ago
-
UK warm homes plan - how can it be delivered?
@editor Sobering thoughts on your article on the workfo...
By Batpred , 12 hours ago
-
RE: Setback savings - fact or fiction?
You are right to be intrigued by it IMHO. SOFAIK it is...
By JamesPa , 18 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@swwils there is no logic to oversizing a heat pump. It...
By AgentGeorge , 21 hours ago
-
RE: Vaillant Sensocomfort Time
Thank youy for the pointer. I think I have managed to ...
By ispookie666 , 1 day ago
-
RE: Forum updates, announcements & issues
I have been doing a lot of work on the site lately and ...
By Mars , 1 day ago
-
@majordennisbloodnok good advice, thanks for that.
By David999 , 2 days ago
-
RE: My Grant R290 9kW Heat Pump Installation
I am following this thread with great interest and than...
By TaffontheTaff , 2 days ago
-
RE: Sizing an ASHP; Heat loss and kW
You can't measure heat loss with a website. But you ca...
By JamesPa , 2 days ago
-
RE: Estimating true heat loss from twelve months of consumption data
@ian33a — I have a sort of residual interest in this pr...
By cathodeRay , 2 days ago
-
Hi, Thank you. So its a Daikin Altherma 3M...
By Lbart68 , 3 days ago
-
I have a Contactum CU. Would the below RCBO (descriptio...
By Batpred , 3 days ago
