Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 24, 2026
ASHP only for heating and DHW: Jan 2024 - 786KW Jan 2025 - 962KW It leaves me thoroughly unimpressed.
@bobtskutter that would still be my preference too.
@hcas But first I have to remove any controls I've set up here such as scheduled setbacks and temp variations? Also what mode do I set the ASHP t...
@hcas But first I have to remove any controls I've set up here such as scheduled setbacks and temp variations? Also what mode do I set the ASHP t...
@hcas I have a Mitsubishi wireless controller/thermostat and access to Melcloud.
@hcas I do indeed have a Mitsubishi Ecodan and can access the Melcloud app. The MC app however is very limited. I take it then that Havenwise is not...
@hcas this is probably a dumb question but, how does one know if it's internet connected?
Thank you @gary
@editor Can you link to the relevant podcast that addresses the Havenwise system, please? Trying to research as the Homely set-up is beyond my tech...
@samiebon1 I don't have a Vaillant so unable to assist with specifics, sorry.
@samiebon1 You had it installed only last week? I would suggest that you need to do nothing and get the installer back pronto!
@abernyte I'm not using Melcloud. I'm programming the schedule on the main controller. I may have to switch to AA.
SPONSORS
Degrees of Separation
Latest Posts
-
Just be aware that Octopus are likely to over estimate ...
By AndrewJ , 54 minutes ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 2 hours ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 15 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 15 hours ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 23 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 24 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 1 day ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 4 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 6 days ago
SPONSORS
